PRODUCTS AND SERVICES
diesel injection systems
  common rail
  common rail spare parts 
  denso common rail injectors spare parts 
  common rail calibration
  injector-pump spare parts
fuel pumps catalogue
diesel injection parts
injectors - nozzles
solenoids - actuators
fuel pipes - hoses
filters
glow plugs
feed pumps
fuel additives
Equipment-Tester-Diagnosis
Equipment and tools
turbochargers
turbochargers catalogue
new turbochargers
remanufacture turbochargers
turbochargers parts
workshop
balancing machines and electronic tester
balancing machines and actuator tester
technical bulletins
 
     

 







  Balancing machines for turbochargers  
 
 
 
 
NEW MRV-2 VIBRATION SORTING RIG
TURBOMAX-10 - HORIZONTAL BALANCING MACHINE
TOOLS FOR TURBOCHARGERS
 
 
NEW MRV-2 VIBRATION SORTING RIG 
 
MRV-1 BALANCING MACHINES
 
 
MRV-2 VIBRATION SORTING MACHINE

The new machine for the turbocharger core assy dynamic balancing.
The result of the acquired experience in the design and in the daily use of its balancing machines, we have come to the maximum optimization of the product: so MRV-2 is born. A new line, extremely compact and functional, a total visibility and a wide access to the work zone are the new, most evident features. 

But the internal innovations are the most relevant ones of MRV-2 project, which improve and further facilitate the machine use.
The CHRA test launch is carried out in a totally automized way, thus removing the variables due to the user's manual ability, and making test results more repeatable and compatible.

An equipment and an onboard system completely revised and redrawn in the direction of a simplicity and reliability of use.

Data reading and system check are now completely digitized and worked out from a latest-generation industrial PC, in Windows XP environment.
A generous display of all functions and results thanks to a 15" TFT monitor, and a brand new dialogue software with the operator. MRV-2 can fully exploit the functionalities of its computer, as it is connectable in line with other PCs, printers and it has a CD-writer for data input or saving.

Its compactness renders MRV-2 very convenient for transportation and handling in the machine shop, making cleaning and maintenance easy.

CHARACTERISTICS

The functioning characteristics have been inherited from the reliability of the previous model MRV-1: the exclusive patent which allows to test a core assy with the relative original charter body, better recreating the internal air flux. The process of a correction angle and of an imbalance module at end launch to be able to intervene with simplicity and precision on the parts to balance. The presence of an air tank (about 300 litres) inside tne machine, and a muffler in accordance with the standards, which make MRV-2 immediately ready for use.

OTHER CARACTERISTICS

Test execution speed increased through automation. 
Exercise stillness in accordance with the standards. 
Constant and precise survey sensitivity. 
Test parameters free choice and possibility to personalize some models recordable in memory. 
Complete set of adapters and accessories for the most requested turbochargers. 
Pneumatic and hydraulic system digital display with indication in real-time of the machine pressures, temperatures and safeties. 
Ultra compact pneumatic milling machine on board machine for fast, good intervention works. 
Stainless steel worktable with template-holder shelf and specific vice on board machine. 
Environmental and accident-prevention validation. 
Machine ready for use with annexed instruction manual. 
Integrate acoustic cases. 
Machine levelling feet with integrated wheels for a fast positioning and an easier maintenance. 

TECHNICAL DATA

Work speed: over 200,000 rpm
Air tank: 272 litres.
Net pressure: minimum 7 bar / maximum 10 bar.
Oil tank capacity: 5 litres (SAE 15/30).
Voltage: 110 - 240 V / 50 - 60 Hz. 
Sizes: height 165 cm, length 125 cm, depth 85 cm.
  
 
TURBOMAX-10 - HORIZONTAL BALANCING MACHINE
 
 
 

Horizontal balancing machine specific for turbocharger rotors in every possible configuration: Complete rotor assemblies, turbine wheels and compressor wheels (using a balanced turbine wheel).

Hard bearing system with permanent calibration: calibration launches are not required. 
Dynamic correction method with choice of the intervention planes. Automatic check of the entire operating cycle with both automatic and manual placement of the rotor in the precise intervention point.

Laser speed sensor with luminous pointer for a precise and easy reading on the wheel blades.

Compact structure with ground based vibration dampening system. Integrated ISO 7475 class C protection for the maximum operating safety.
Automatic reading of the balancing planes position thanks to laser pointing sliding cursors.

Self-regulating and self-tensioning rotor belt locking system. 

Vertical traction in order to avoid incorrect directional forces during the rotation.

- Wheel weights from 50 g to 5 Kg
- Shaft diameters from 4 to 30 mm
- Minimum distance between the supports: 24mm
- Test speed from 1000 to 3000 rpm
- Unbalance sensitivity threshold: 0,3gmm
- 15 touch-screen PC-monitor with intuitive and simplified software to allow all users to perform the balancing operations.
- Connectible to local networks, Internet and peripherals trough Ethernet, wireless connection and USB. Creation of PDF balancing certificates.
- Multilingual support in English, French, Spanish, Italian and Chinese. Additional languages supported (if translated by the customer).
- Dimensions: Width 80 cm, depth 70 cm, height 165 cm

  
 
TOOLS FOR TURBOCHARGERS
 
TOOLS FOR TURBOCHARGERS

Our range is complete, from the small wrenches to the Sand Blasting Machine, all our turbocharger tools are shown in our catalogue.
 
Subscribe to diesel levante to get our turbochargers catalogue

Subscribe...you need one minute! Diesel levante offers the possibility to consult its latest turbochargers catalogue. It is free, quick and helpful.

Please complete all the fields and in few minutes you will receive direct to your inbox the passwords to enter in the reserved area.
 
Subscribe now   Go to the catalogue
 
send us an email

 info@dieselevante.com
* send us a fax

 +39 080.5357579
call us

 +39 080.5368586
 
 
 
 
 
Diesel Levante Srl -  Headquarters 
S.S. 96 Km. 116 - 70026 Modugno (Ba) - Italy
Tel +39 080.5368586 - Fax +39 080.5357579
Tel +39 080.5367468 - Tel +39 080.5357615
E-mail: info@dieselevante.com
call center
 
 
 



  2004 - Diesel Levante Srl - Privacy - Mfp - Efp - created by www.omnilink.it