to modify the pression of the calibration, start pression and the quantity of fuel of the common rail injector. Reducing the thickness we
optain an increase in the opening pression (Bar) and in the quantity of fuel (Cm3) of the injector.
AZ0019 - 08 CR
Diam: 5,50 mm
Hole: 3,40 mm
Thickness: 1,20 - 1,70 mm (24
measures)
Cut: ogni 0,02 mm
Box: 10 items x thickness
Total: 240 items
AZ0019 - 08 CR5
Diam: 5,50 mm
Hole: 3,40 mm
Thickness: 1,20 - 1,70 mm (11
measures)
Cut: ogni 0,05 mm
Box: 10 items x thickness
Total: 1100 items
AZ0019 - 17 CR
Diam: 5,50 mm
Hole: 3,40 mm
Thickness: 0,90 - 1,90 mm (21
measures)
Cut: ogni 0,05 mm
Box: 10 items x thickness
Total: 210 items
AZ0019 - 12 CR
Diam: 4,50 mm
Hole: 2,00 mm
Thickness: 1,20 - 1,70 mm (24
measures)
Cut: ogni 0,02 mm
Box: 10 items x thickness
Total: 240 items
AZ0019 - 12 CR5
Diam: 4,50 mm
Hole: 2,00 mm
Thickness: 1,20 - 1,70 mm (11
measures)
Cut: ogni 0,05 mm
Box: 10 items x thickness
Total: 110 items
AZ0019 - 14 CR
Diam: 4,20 mm
Hole: 2,00 mm
Thickness: 1,20 - 1,70 mm (24
measures)
Cut: ogni 0,02 mm
Box: 10 items x thickness
Total: 240 items
AZ0019 - 14 CR5
Diam: 4,20 mm
Hole: 2,00 mm
Thickness: 1,20 - 1,70 mm (11
measures)
Cut: ogni 0,05 mm
Box: 10 items x thickness
Total: 110 items
AZ0019 - 15 CR
Diam: 5,30 mm
Hole: 2,40 mm
Thickness: 1,20 - 1,70 mm (24
measures)
Cut: ogni 0,02 mm
Box: 10 items x thickness
Total: 240 items
AZ0019 - 21 CR
Diam: 5,30 mm
Hole: 2,40 mm
Thickness: 1,72 - 1,90 mm (10
measures)
Cut: ogni 0,02 mm
Box: 10 items x thickness
Total: 100 items
SOLENOID WASHERS KIT
useful to modify the solenoid power. Reducing/increasing the thickness of the washer the solenoid power reducers/raises
AZ0019 - 11 CR
Diam: 23,50 mm
Hole: 19,00 mm
Thickness: 1,00 - 1,10 mm (11
measures)
Cut: ogni 0,01 mm
Box: 10 items x thickness
Total: 110 items
AZ0019 - 18 CR
Diam: 23,50 mm
Hole: 19,00 mm
Thickness: 0,90 - 1,00 mm (11
measures)
Cut: ogni 0,01 mm
Box: 10 items x thickness
Total: 110 items
AZ0019 - 10 CR
Diam: 22,00 mm
Hole: 19,00 mm
Thickness: 1,00 - 1,10 mm (11
measures)
Cut: ogni 0,01 mm
Box: 10 items x thickness
Total: 110 items
AZ0019 - 19 CR
Diam: 22,00 mm
Hole: 19,00 mm
Thickness: 0,90 - 1,00 mm (11
measures)
Cut: ogni 0,01 mm
Box: 10 items x thickness
Total: 110 items
SETTLEMENT WASHERS KIT
useful to modify the conjunction
between the upper lever of the ball-holder and the smooth part of the holding-ball valve. It enables the regulation of the solenoid and so the movement of the ball.
AZ0019 - 09 CR
Diam: 15,70 mm
Hole: 10,50 mm
Thickness: 1,20 - 1,30 mm (11
measures)
Cut: ogni 0,01 mm
Box: 10 items x thickness
Total: 110 items
KIT OF POINTERS
to modify the fuel quantity of the common rail injectors. Reducing the thickness of the pointers we
optain an increase in the fule quantity of the injector.