|
9732 |
|
|
|
 |
|
|
| 1 |
9733 |
|
Centesimal 5 mm stroke comparator |
|
|
|
|
|
| 2 |
9087/A |
(Rif. BH 1687233011) |
Centesimal10 mm stroke comparator |
|
|
|
|
|
| 3 |
9761/A5 |
|
Bearing reduction from 3 mm to 2, 5 mm |
|
|
|
|
|
| 4 |
9501 |
|
Magnet for comparator nut thread 2,5 mm |
|
|
|
|
|
| 5 |
9186 |
(Rif. KDEP 2940) |
Dial gauge bearing 12x1 mm
EPIVA..B |
|
|
|
|
|
| 6 |
9186/A |
|
Dial gauge bearing 13,5x2 mm
EPIVA..C |
|
|
|
|
|
| 7 |
9186/8 |
(Rif. KDEP 1002) |
Dial gauge bearing 12,5x1 mm EPIVA..B (Rif. KDEP 1002) |
|
|
|
|
|
| 8 |
9471/9 |
(Rif. KDEP 1085) |
Dial gauge bearing 8x1 mm EP/VE |
|
|
|
|
|
| 9 |
9580 |
|
Dial gauge prolonged 8x1 mm EP/VE |
|
|
|
|
|
| 10 |
15/D |
|
Two shafts long type 85 mm, 0 2 mm, thread 2,5 mm |
|
|
|
|
|
| 11 |
9682 |
|
Dial gauge bearing with a spii I point pipe and an extended rod with returning actlon.
Right for A, B, BV BOSCH in line pumps 12x1,5 14,x1,5 |
|
|
|
|
|
|
|
| 12 |
13/B |
|
Two prolonged shafts 0 4 mm, 58 mm
length, thread 2,5 mm |
|
|
|
|
|
|
|
| 13 |
12/A |
|
Two shaft 40 mm length 0 4 mm thread 2,5 mm |
|
| Dialgauge bearing tool box to survey the delivery start on rotary and line Bosch pumps. |
|
 |
|
| 1 |
9087
(BH Rif. 1687233011)
Centesima I comparator 10 mm stroke |
|
|
| 2 |
9348
(BH Rif. 1687233012)
Centesimal comparator 30 mm stroke
for BH rotary pumps timing . |
|
|
| 3 |
9733
Centesimal comparator 5 mm stroke |
|
|
| 4 |
9500
(BH Rif. 1687233015)
Decimai comparator 30 mm stroke
to survey the rod stroke level on line pumps. |
|
|
| 5 |
9580
Comparator bearing
on Bosch pumps EP/VE prolonged type . |
|
|
| 6 |
9682
Dial gauge bearing with a splll point pipe
and an extended rod with returning actlon,
Right for A, S, BV and line BOSCH pumps
12x1,5 - 14x1,5 |
|
|
| 7 |
9471/9
(KDEP Rif. 1085)
Standard comparator
for EP/VESOSCH pumps |
|
|
| 8 |
9186
(KDEP Rif. 2940)
Comparator bearing on BOSCH EPIVA...B
pumps, thread 12x1 mm . |
|
|
| 9 |
9186/A
Comparator bearlng on BOSCH EPIVA.C
pumps, thread 13,5x2 mm |
|
|
| 10 |
9186/8
(KDEP Rif. 1002)
Comparator bearing on BOSCH EPIVA...B
pumps, thread 12,5x1 mm |
|
|
| 11 |
9501
Magnet for comparator nut thread 2,5 mm . |
|
|
| 12 |
12 A
Two shaft 40 mm length 0 4 mm thread 2,5 mm |
|
|
| 13 |
13 8
Two prolonged shaft 0 4 mm thread 2,5 mm
58 mm length . |
|
|
| 14 |
14 C
Two spindles 0 4 mm - 9 mm length
thread 2,5 mm |
|
|
| 15 |
15 D
Two shaft long type 85 mm 0 2 mm
thread 2,5 mm |
|
|
| 16 |
9761/A5
Bearing reduction from 3 mm to 2,5 mm |
|
|
|
|
9701 |
|
|
|
|
|
|
| 1 |
9087 |
(Rif. BH 1687233011) |
Centes;mal10 mm stroke comparator
|
|
|
|
|
|
| 5 |
9580 |
|
Comparator bearing on Bosch pumps EPNE prolonged type |
|
|
|
|
|
| 7 |
9471/9 |
(Rif. KDEP 1085) |
Standard comparator bearing on Bosch rotating pumps EPNE type
|
|
|
|
|
|
| 8 |
9186 |
(Rif. KDEP 2940) |
Comparator bearing on Bosch EPNA...B rotating pumps, thread 12x1 |
|
|
|
|
|
| 9 |
9186/A |
|
Comparator bearing on Bosch EPNA...C rotating pumps, thread 13,5x2 mm |
|
|
|
|
|
| 10 |
9186/B |
(Rif. KDEP 1002) |
Comparator bearing on Bosch EPNA...B rotating pumps, thread 12,5x1mm |
|
|
|
|
|
|
12 A |
|
Two shaft 40 mm length '" 4 mm thread 2,5 mm |
|
|
|
|
|
|
13 B |
|
Two prolonged shaft '" 4 mm 58 mm length thread 2,5 mm |
|
|
|
|
|
|
13 B/1 |
|
Two prolonged shaft 58 mm '" 4 mm thread 3 mm |
|
|
|
|
|
|
14 C |
|
Two spindles '" 4 mm 9 mm length with 2,5 mm thread |
|
|
|
|
|
|
15 D/1 |
|
Rod long type 85 mm, '" 2 mm thread 2,5 mm |
|
|
|
|
|
| 18 |
9187 |
(Rif. KDEP 1026) |
Dial gauge bearing for the delivery start w;th rod for EPNA...C Bosch pump - 6x1 mm |
|
|
|
|
|
| 17 |
9347 |
|
Dial gauge bearing to survey the end stroke on the engine PEUGEOTetc. 14x2 mm wlth extended rod '" 4,220 mm |
|
|
|
|
Complete tool box with comparator bearings for the survey of delivery star! ratio on Bosch
rotating pumps A, B, C and VE type on Diesel engines. |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9703 |
|
|
|
|
| 1 |
Complete tool box with ali comparator bearings
lor..the survey 01delivery start ratio
on Bosch rotating pumps A, B, C and VE type
on Diesel enginees.
(Centesimal 30 mm stroke comparator incorporated.
Same tools 01 9701) |
|
|
|
|
|
|
|
|
|
9704 |
|
|
|
|
| 2 |
Complete tool box with ali comparator bearings
lor the survey 01 delivery start ratio
on Bosch rotating pumps A, B, C and VE type
on Diesel engines.
(Centesimal 5 mm stroke comparator incorporated.
Same tools 019701) |
|
|
|
|
|
|
|
|
|
9702 |
|
|
|
|
| 3 |
Complete tool box with ali comparator bearings
lor the survey 01 delivery star! ratio
on Bosch rotating pumps A, B,C and VE type
on Diesel engines.
(Without comparator. Same tools 019701) |
|
|
|
|
|
|
|
| 9761/A |
| |
|
Comparator bearing Kit for the timing
of rotative pumps to use on test bench or directly
on the vehicle. Useful for BOSCH EP..VA...VEpumps,
CAV, DPA, DPC, DPS and ROTO DIESELon diesel
fuel systems for FIAT (RITMO,UNO etc.)
ALFA, LANCIA, VOLKSWAGEN (GOLF, PO~.o etc.),
PEUGEOT(205, 309 etc.), RENAULT,CITROEN,
ValVa, 5MB, AUDI etc. and medium trucks.
The Kit includes centesimal comparator 5 mm stroke
with back connection. |
|
|
| 9761/A |
|
|
Comparator bearing kit for rotative pumps BOSCH EP...VA...VE,CAV,DPA,DPC, DPS |
|
|
|
|
|
|
|
|
| 1 |
9861
(Rif. 1804-606/1804-607/1804-600)
Comparator bearing for the timing on ROTO DIESEL- DPC pumps
to be used directly on the engine or during the testing on the bench |
|
|
| 2 |
9761/A1
(Rif. 1804-761)
Timing pin on ROTO DIESEL |
|
|
| 3 |
9186
(KDEP Rif. 2940)
Comparator bearing for BOSCH VA pumps |
|
|
| 4 |
9761/A2
(Rif. 1804-767)
Dial indicator for ROTO DIESEL pumps |
|
|
| 5 |
9761/A3
(Rif. 1804-764)
Fixing nut for flange comparator (Fig. 9) |
|
|
| 6 |
9761/A4
(Rif. 1804-766)
Nut couple to fix to the pump the comparator bearing (Fig. 4) 9761/A2 |
|
|
| 7 |
9733/A
Centesimal comparator 5 mm stroke with back connection |
|
|
| 8 |
9761/A5
Bearing reduction from 3 mm to 2,5 mm |
|
|
| 9 |
9761/A6
Comparator bearing for timing searching on CAV-DPC in 5 pieces |
|
|
|
9761/B
(Rif. 1084-486) 1 Angle bracket |
|
|
|
9761/C
(Rif. 1804-487) 1 Union |
|
|
|
9761/D
(Rif. 1804-4881 A) 1 Push rod with guide (54 mm) |
|
|
|
9761/E
(Rif. 1804-489) 1 Distance ring |
|
|
|
9761/F
(Rif. 1804-491) 1 Equalizer comparator bearing |
|
|
| 10 |
9674
(Rif. 7244-448)
Timing lock for CAV-DPS pumps |
|
|
| 11 |
9761/A7
(Rif. 7244-437)
T25 TORX wrench with 1,5 mm hole for DPS pumps |
|
|
| 12 |
9761/A8
Comparator bearing composed by four pieces for the timing
of CAV-DPS pumps and without reduction for the timlng
of BOSCH EP...VEpumps |
|
|
 |
|
|
|
|
|
| 1 |
9861
Comparator bearing for the timing
of ROTO DIESELpumps to be
used directly on the engine or during
the testing on the bench |
|
|
|
|
|
|
|
(Original Rif. 1804/606 - 1804/607 - 1804/600)
New comparator bearing (30 mm).
It has a new fasI method for the timing of CAV ROTO DIESEL
pump "8" index with access to the timing references
by the cap pump (our art. No. 9861 is a compendium of our
timing tool-box No. 9761).
The pump cap has a timing bush with a clogging plug.
On this plug You will find incised the rod stroke value.
This value correspond to the timing value to P.M.S:
With this new system it is possible to eliminate the corner
transmission, the rod fixing and in this way there
is no need to empty the pump casing for the stroke checking. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kit supporto comparatore per fase
su ROTO DIESEL
Comparator bearing Kit for the timing
on ROTO DIESEL |
|
|
| 2 |
9761/A1
(Rif.1804-761)
Timing pin |
|
|
| 4 |
9761/A2
(Rif.1804-767)
Dial indicator bracket |
|
|
| 5 |
9761/A3
(Rif. 1804-764)
Nut |
|
|
| 6 |
9761/A4
(Rif.1804-766)
Bearing lock wrench |
|
|
 |
|
|
|
| 9 |
9761/A6 Supporto comparatore per fase
CAV-DPC (5 pezzi)
Comparator bearing for CAV-DPC
timing (5 pieces) |
|
|
|
|
|
|
|
(Rif. 1804/486 -1804/487 - 1804-488A54 mm.
1804/489 - 1804/491)
Operation outline of the tools for the timing of CAV-DPC pump
(for CAV-DPS you need only the spring pln included).
(Notice: the rotation of the driving shaft that will
be later locked, will point out the lift of the shaft inserted
in the elastic ring of pump.
Refering to the obtained level you will locale the
injection pump with the locking of bolts). |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 10 |
9674 (Rif. 7244-448)
Timing lock for CAV-DPS pump |
|
|
| 12 |
9761/A8
(Rif. 7244-448 + KDEP 1085 similar)
Comparator bearing in 4 pieces
for the timing of CAV-DPS pumps and
without reduction
for BOSCH EP..'vEpumps |
|
|
|
 |
|
|
|
|
| 9701/A |
| |
|
Complete box of comparator bearings
for the timing of rotative
BOSCH EP...vA...vEpumps on diesel vehicles
and medium trucks |
|
| 9701/A |
|
Comparator bearing kit
for rotative pumps BOSCH EP...VA...VE |
|
|
|
|
|
|
|
|
| 1 |
9733
Centesima! comparator
5 mm stroke |
|
|
| 2 |
90871A
Centesimal comparator
10 mm stroke |
|
|
| 3 |
9783
Comparator bearing in 5 pieces
(see catalogue) |
|
|
| 4 |
9186
(KDEP Rif. 2940)
Comparator bearing
for BOSCH EP..VA...pumps |
|
|
| 5 |
9471/9
(KDEP Rif. 1085)
Comparator bearing with two little rods
for the timing on rotative BOSCH EP..VE
(see catalogue) |
|
|
| 6 |
9761/A5
Comparator reduction
from 3 mm to 2,5 mm |
|
|
| 7 |
14/C
Couple cap for comparator
0 4 - Thread2,5- 3 mm |
|
|
| 8 |
9580
Extensioned camparator bearing
to survey the stroke
on rotati ve BOSCH EP..VE pumps
(see catalogue) |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 |
9783
Comparator bearing
in 5 pieces |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extended universal comparator bearing
for EPVA..VEand Nippondenso pumps.
(To be used when distance
and encumbrance will noI permit an easy accessi.
(Comparator noI included). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5 |
9471/9
(KDEP Rif. 1085)
Comparator bearing with two little rods
for the timing
on rotative BOSCH EP...VE |
|
|
| 8 |
9580
Extended comparator bearing
to survey the stroke
on rotative BOSCH EP..VEpumps |
|
|
|
|
| 9761 |
| |
|
Tool-box with comparator bearing for engine
stroke setting on CAV DPC and DPS
rotating pumps supplied with back connection
centesimal comparator 5 mm stroke |
|
|
9761
Operation outline of the tools for the timing
of CAV OPC pump (for CAV OPS you need only
the spring pin included).
(Notice: the rotation of the driving shaft that
will be later locked, will point
out the lift of the shaft inserted in the
elastic ring of pump.
Referring to the obtained level you will locale
the injection pump with the locking of bolts).
|
|
|
|
inviaci un e-mail
inviaci un fax al
n. 
chiamaci al n. 