|
9483 KW |
|
|
|
 |
|
|
| 1 |
9208 |
(Rif,BHKDEP1097) |
Tampone Plug |
|
|
|
|
|
| 2 |
9209 |
(Rif.BHKDEP1097) |
Plate and bolt for 9208 (2 parts) |
|
|
|
|
|
| 3 |
9190 |
(Rif. BHKDEP1101) |
Bush for the housing of rotor runner |
|
|
|
|
|
| 4 |
9471/2 |
(Rif.BHKDEP1086) |
Wrench for metering valve |
|
|
|
|
|
| 5 |
9207 |
(Rif. BH KDEP 1091) |
Toothed wrench for control lever |
|
|
|
|
|
| 6 |
9346 |
|
Aluminium shim for 9180 (fig, 9) |
|
|
|
|
|
| 7 |
9183 |
(Rif.1688130054) |
Reduction for 9180 (fig. 9) |
|
|
|
|
|
| 8 |
9182+ 9181 |
(Rif.BH 1688130300 +1688130400) |
Reduction for 9180 (fig. 9) 2 parts |
|
|
|
|
|
| 9 |
9180 |
(Rif.BH 1688130121) |
Graduated device |
|
|
|
|
|
| 10 |
9471/8 |
(Rif. BH KDEP 1100) |
Bush for roll bearing ring housing |
|
|
|
|
|
| 11 |
9204 |
Rif.BH KDEP 1092) |
Adjusting wrench for pressure governing valve |
|
Cassetta per pompe BOSCH EPIV A... B...
composta di 11 pezzi
T001 box with 11 pieces for EPIV A... B... C BOSCH pumps |
|
 |
|
| 1 |
9180
(BH Rif. 1688130121)
Graduated device to test the automatic
advance EP/VA...B/C BH pumps.
Equipped with extended pin
(BH Rif. 1688130500) |
|
|
| 2 |
9180/A
Spare plexiglass tube
(not in box) |
|
|
| 3 |
9181
(BH Rif. 1688130400)
Adapter shaft on graduated device
for EP/v A...B |
|
|
| 4 |
9182
(BH Rif. 1688130300)
Threaded union 28x1,5 for graduated
device EP/v A...B. Only reduction |
|
|
| 5 |
9183
(BH. Rif. 1688130054)
Threaded unlon 26x1,5 for graduated
device EP/VM. Only reduction |
|
|
| 6 |
20 mm shim lor 9180
graduated device EP/v A...B/C
9346 |
|
|
| 7 |
(BH Rif. KDEP 1100)
Cap lor roll bearing ring houslng
9471/8 |
|
|
| 8 |
(BH Rif. KDEP 1101)
Cap for the housing of the timing
system rotor runner (inside diamo 46 mm)
9190 |
|
|
| 9 |
9471/2
(BH Rif. KDEP 1086)
Wrench for governing pressure valve |
|
|
| 10 |
9207
(BH Rif. KDEP 1091)
Toothed wrench for control lever governmg |
|
|
| 11 |
9204
(BH Rif. KDEP 1092)
Adjusting wrench for pressure governing valve |
|
|
| 11 |
9208
(BH Rif. KDEP 1097)
Jig to extract the eccentric ring fram
the pump casing |
|
|
|
|
|
|
|
|
9471/A |
|
|
|
|
|
|
| 1 |
9471/1 |
(Rif.BH1688130240ex 1688130139) |
Graduated device |
|
|
|
|
|
| 2 |
9471/2 |
(Rif.BHKDEP1086) |
Governing wrench |
|
|
|
|
|
| 3 |
9471/5 |
(Rif.BHKDEP1080) |
Triangular wrench |
|
|
|
|
|
| 4 |
9471/6 |
(Rif.BHKDEP1087) |
Triangular wrench |
|
|
|
|
|
| 5 |
9471/9 |
(Rif.BHKDEP1085- 1680110630) |
Dial gauge bearing (2
parts) |
|
|
|
|
|
| 6 |
9471/11 |
(Rif.BHKDEP1084- 1680110620) |
"MS" level Spacer |
|
|
|
|
|
| 7 |
9184
9471/13 |
(Rif.BHKDEP2931/3- 1683458150) |
Spacer reduction for our art. |
|
|
|
|
|
| 8 |
9471/14 |
(Rif.BHKDEP1032) |
Dial gauge bearing (2
parts) |
|
|
|
|
|
| 9 |
9471/15 |
(Rif.BH KDEP 10821680110610) |
Shaft toothed wrench |
|
|
|
|
|
| 10 |
9553 |
(Rif.BHKDEP2921) |
Dynamometric wrench reduction |
|
|
|
|
|
| 11 |
9188 |
(Rif.BHKDEP1027- 1688131980) |
Bush puller |
|
|
|
|
|
| 12 |
9184 |
(Rif.BH1688130045) |
Measure device with comparator |
|
|
|
|
|
| 13 |
9185 |
(Rif.BHKDEP2931/2 - 1683391150) |
Spacer reduction for our arI. 9184 (2 parts) 1 |
|
|
|
|
|
| 14 |
9184
9301 |
(Rif.BHKDEP2931/1- 1683391114) |
Spacer reduction for our art. |
|
|
|
|
|
| 15 |
9184
9301/A |
(Rif.BH1683391125) |
Spacer reduction for our art. |
|
|
|
|
Tool box for EP/VEBOSCH pumps composed by 20 pieces (reduced set) |
|
|
|
9471/A |
|
|
|
|
|
|
| 1 |
9471/1 |
(Rif. BH 1688130240 ex 1688130139) |
Graduated device |
|
|
|
|
|
| 2 |
9471/2 |
(Rif. BH KDEP 1086) |
Governing pressure wrench |
|
|
|
|
|
| 3 |
9471/5 |
(Rif. BH KDEP 1080) |
Triangular wrench |
|
|
|
|
|
| 4 |
9471/6 |
(Rif. BH KDEP 1087) |
Trlangular wrench |
|
|
|
|
|
| 5 |
9471/9 |
(Rif. BH KDEP 1085 - 1680110630) |
Dial gauge bearing (2 parts) |
|
|
|
|
|
| 6 |
9471/11 |
(Rif. BH KDEP 1084 - 1680110620) |
"MS" level spacer |
|
|
|
|
|
| 7 |
9471/13 |
(Rif. BH KDEP 2931/3 - 1683458150) |
9184 spacer reduction |
|
|
|
|
|
| 8 |
9471/14 |
(Rif. BH KDEP 1032) |
Dial gauge bearlng (2 parts) |
|
|
|
|
|
| 9 |
9471/15 |
(Rif. BH KDEP 1082 - 1680110610) |
Shalt toothed wrench |
|
|
|
|
|
| 10 |
9553 |
(Rif. BH KDEP 2921) |
Dynamometric wrench reduction |
|
|
|
|
|
| 11 |
9188 |
(Rif. BH KDEP 1027 - 1688131980) |
Bush puller |
|
|
|
|
|
| 12 |
9184 |
(Rif. BH 1688130045) |
Measure device |
|
|
|
|
|
| 13 |
9185 |
(Rif. BH KDEP 2931/2 - 1683391150) |
9184 spacer reduction (2
parts) |
|
|
|
|
|
| 14 |
9301 |
(Rif. BH KDEP 2931/1 - 1683391114) |
9184 spacer reduction |
|
|
|
|
|
| 15 |
9301/A |
(Rif. BH 1683391125) |
9184 spacer reduction |
|
|
|
|
|
| 16 |
9186 |
(Rif. BH KDEP 2940) |
Dlal gauge bearlng with rod (2 parts) |
|
|
|
|
|
| 17 |
9204 |
(Rif. BH KDEP 1092) |
Dlal
Adjusting wrench |
|
|
|
|
|
| 18 |
9471/8 |
(Rif. BH KDEP 1100) |
Cap tor roll bearing ring |
|
|
|
|
|
| 19 |
9190 |
(Rif. BH KDEP 1101) |
Cap timing system rotor runner |
|
|
|
|
|
| 20 |
9471/7 |
|
Cap timing system rotor runner |
|
|
|
|
|
| 21 |
9262 |
(Rif. BH KDEP 1098) |
Shalt bush kit (3
parts) |
|
|
|
|
|
| 21 |
9261 |
|
Aluminium fenders (2
parts) |
|
|
|
|
|
| 22 |
9189 |
(Rif. BH KDEP 2934) |
Tool to survey the EPIVA slider level |
|
|
|
|
|
| 22 |
9195 |
|
Gauged ring tor 9189 |
|
|
|
|
|
| 23 |
9194 |
(Rif. BH KDEP 2935) |
ristorI spring spacer |
|
|
|
|
|
| 24 |
9281 |
(Rif. BH KDEP 1099) |
Positioning gauge |
|
|
|
|
|
| 25 |
9280 |
|
Valve jig |
|
|
|
|
|
| 26 |
9412 |
(Rif. BH KDEP 1094-1095) |
Governor and electromagnet jig (4 parts) |
|
|
|
|
|
| 27 |
9411 |
(Rif. BH KDEP 2939) |
Oil seal connector on 0 17 shaft |
|
|
|
|
|
| 28 |
9471/3 |
(Rif. BH KDEP 1093) |
Elastic bush inserter (2
parts) |
|
|
|
|
|
| 29 |
9197 |
|
Threaded puller 5xO,8 mm (2
parts) |
|
|
|
|
|
| 30 |
9196 |
|
Bush connector |
|
|
|
|
|
| 31 |
9202 |
|
Roli puller |
|
|
|
|
|
| 32 |
9184
9301/A |
(Rif.BH1683391125) |
Spacer reduction for our art. |
|
|
|
|
|
| 32 |
9471/4 |
|
Male reduction 12x1,5 - Female12x1,5 |
|
|
|
|
|
| 32 |
9471/16 |
|
Male reduction 12x1,5 - Female 14x1,5 |
|
|
|
|
|
| 32 |
9199 |
|
Male reduction 12x1,5 - 10x1 |
|
|
|
|
|
| 32 |
9200 |
|
Double bolt 12x1,5 |
|
|
|
|
|
| 33 |
9201 |
(Rif. BH KDEP 2938) |
Hook for "OR" removing |
|
|
|
|
|
| 34 |
9610 |
|
Screwdriver for torx screws |
|
|
|
|
|
| 35 |
9607 |
|
Screwdriver for 0 5 mm socket |
|
|
|
|
|
| 36 |
9556 |
(Rif. BH KDEP 1107) |
Jig to connect the control levers |
|
|
|
|
|
| 37 |
9518 |
(Rif. BH KDEP 1106) |
Jig for Ihe spacer bush seal |
|
|
|
|
|
| 38 |
9833 |
(Rif. BH KDEP 1132) |
Puller inserter for bushings (4
parts) |
|
|
|
|
|
| 39 |
9471/12 |
(Rif. BH KDEP 1130) |
Stopping levere jig |
|
|
|
|
|
| 40 |
9586 |
(Rif. BH KDEP 1113) |
Self-threading puller for oil seal |
|
|
|
|
|
| 41 |
9625 |
(Rif. BH KDEP 2890) |
End floal tool |
|
|
|
|
|
| 42 |
9247 |
(Rit, BH KDEP 1128) |
Dial gauge bearing |
|
|
|
|
|
| 43 |
9628 |
(Rif. BH KDEP 2899) |
Surveying gauge for cam shaft |
|
|
|
|
|
| 44 |
9471/15/A |
|
Shaft extended toothed wrench |
|
|
|
|
|
| 45 |
9471/15/8 |
|
Shaft hexagonal wrench |
|
|
|
|
|
| 46 |
9837/8 |
|
Nylon plug for oil seal puller |
|
|
|
|
|
| 47 |
9837/C |
|
Nylon plug for oil seal inserter |
|
|
|
|
Complete tool box for EP/VE BOSCH pumps equipped with 60 pieces |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9471/1
(BH Rif. 1688130240 ex 1688130139)
Graduated device to test the
automatic advance EP/VE BOSCH pump
reinforced |
|
|
|
9471/1/A
Spare plexiglass tube (not in box)
reinforced |
|
|
| 2 |
9471/2
(KDEP Rif. 1086)
Governing pressure wrench |
|
|
| 3 |
9471/5
(KDEP Rif. 1080)
Triangular wrench for centrai
closing plug |
|
|
| 4 |
9471/6
(KDEP Rif. 1087)
Triangular wrench for bearing screws
governing lever |
|
|
| 5 |
9471/9
(KDEP Rif. 1085 - BH 1680110630)
Dial gauge bearing with rods |
|
|
| 6 |
9471/11
(KDEP Rif. 1084 - BH 1680110620)
Spacer to adjust the sleeve
starting travel "MS" level |
|
|
| 7 |
9471/13
(KDEP Rif. 2931/3 - BH 1683458150)
Spacer reduction for our arI. 9184 |
|
|
| 8 |
9471/14
(KDEP Rif. 1032)
Dial gauge bearing to zero the dial gauge |
|
|
| 9 |
9471/15
(KDEP Rif. 1092 - BH 1680110610)
Toothed wrench to fix
and adjust the governor shaft |
|
|
| 10 |
9553
(KDEP Rif. 2921)
Dinamometric wrench reduction
with 1/2" double square |
|
|
 |
|
| 11 |
9188
(KDEP Rif. 1027 - BH1688131980)
Bush puller for the pressure governing valve
and bush device
01the automatic supplement |
|
|
| 12 |
9184
(BH Rif. 1688130045)
Measure device (with comparator)
for the delivery start governing 12x1 mm |
|
|
| 13 |
9185
(KDEP Rif. BH 2931/2 - BH 1683391150)
Spacer reduction for our art. 9184 -13,5x2 mm |
|
|
| 14 |
9301
(KDEP Rei BH 2931/1 - BH 1683391114)
Spacer reduction for our art. 9184 - 12x1 mm |
|
|
| 15 |
9301/A
(BH Rif. 168339125)
Spacer reduction for our art. 9184 -12,5x1 mm |
|
|
| 16 |
9186
(KDEP Rif. 2940)
Dial gauge bearing for the delivery start
12x1 mm with rod |
|
|
| a |
9186/A
Dial gauge bearing
for the delivery start 13,5x2 mm |
|
|
| b |
9186/8
(KDEP Rif. 1002)
Dial gauge bearing
for the delivery start 12,5x1 mm |
|
|
| c |
9187
(KDEP Rif. 1026)
Dial gauge bearing for the delivery start
with rod for EPNA...C BOSCH pump - 6x1 mm |
|
|
| 17 |
9204
(KDEP Rif. 1092)
Adjusting wrench for pressure governing valve |
|
|
| 18 |
9471/8
(KDEP Rif. 1100)
Cop for roll bearing ring housing |
|
|
| 19 |
9190
(KDEP Rif. 1101)
Cap for the housing of the timing
system rotar runner (inside diamo 46 mm) |
|
|
| 20 |
9471/7
Cap for the housing of the timing
system rotar runner (inside diamo 42 mm) |
|
|
 |
|
| 21 |
9262
(KDEP Rif. 1098)
Bush kit to dismount the Seeger ring
on the motoring shaft |
|
|
| 22 |
9261
Aluminium fenders |
|
|
| 22 |
9189
(KDEP Rif. 2934)
Tool to survey EPIVA siider level |
|
|
| 23 |
9195
Gauged nng tor 9189 |
|
|
| 24 |
9194
(KDEP Rif. 2935)
Space to adjust the preolading
of the piston spnng |
|
|
| 25 |
9281
(KDEP Rif. 1099)
Positioning gauge |
|
|
| 26 |
9280
Jig to press the closing cap
of the spheric valve |
|
|
| 27 |
9412
(KDEP Rif. 1094-1095)
Jig lo measure the spring preloading
of the governor and electromagnet |
|
|
| 28 |
9411
(KDEP Rif. 2939)
Oli seal connector on 0 17 shatt |
|
|
| 29 |
9471/3
(KDEP Rif. 1093)
Elastic bush inserter on the pressure
governing valve |
|
|
| 30 |
9197
Threaded puller 5xO,8 mm |
|
|
| 31 |
9196
Bush connector |
|
|
| 31 |
9471/4
Male reduction 12x1,5 - Female 12x1,5 |
|
|
| 31 |
9471/16
Male reduction 12x1,5 - Female 14x1,5 |
|
|
| 31 |
9199
Male reduc1ion 12x1,5 - 10x1 |
|
|
| 31 |
9200
double bolt 12x1,5 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 33 |
9201
(KDEP Rif. 2938)
Hook for "OR" extraction |
|
|
| 34 |
9610
Screwdriver for torx T30 screws |
|
|
| 35 |
9607
Spheroidal screwdriver
to operate until 45° |
|
|
| 36 |
9556
(KDEP Rif. 1107)
Jig lo connect the contrai levers |
|
|
| 37 |
9518
(KDEP Rif. 1106)
Jig for the spacer bush seal |
|
|
| 38 |
9833
(KDEP Rif. 1132)
Puller inserter for bushings in four pieces |
|
|
| a |
9834
(BH Rif. 1460324315)
Ground steel bearing for accelerator
lever - h. 19,9mm (not in box) |
|
|
| b |
9835
(BH Rif. 1460324316)
Bearing h. 24,4 mm (not in box) |
|
|
| c |
9836
(BH Rif. 1460324333)
Bearing h. 30,6 mm (not in box) |
|
|
| d |
9270
(BH Rif. 1460324332)
Bearing h. 35,1 mm (not in box) |
|
|
| e |
9271
(BH Rif. 1460324331)
Bearing h. 40,6 mm (not in box) |
|
|
| 39 |
9471/12
(KDEP Rif. 1130)
Jig to contrai the action level
01the stopping lever (27,7 mm) |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 40 |
9586
(KDEP Rif. 1113)
Self-threading puller for oi! seal
on (2)17 shaft |
|
|
| 40 |
9585
(KDEP Rif. 1114)
Self-threading puller for oil seal
on (2)20 shaft (not in box) |
|
|
| 41 |
9625
(KDEP Rif. 2890)
Tool to measure the end float on
(2)17 cam shaft (gauge noI included) |
|
|
| 42 |
9247
(KDEP Rif. 1128)
Dial gauge bearing to survey
the bushing wear on the cam shaft |
|
|
| 43 |
9628
(KDEP Rif. 2899)
Surveying gauge for cam shaft
protrusion level (2)17 and (2)20 |
|
|
| 44 |
9471/15A
Extended toothed wrench to fix
the shaft on the governor |
|
|
| 45 |
9471/158
Hexagon wrench (14 mm) to fix
and adjust the governor shaft |
|
|
| 46 |
9837/B
Nylon plug for oil seal puller |
|
|
| 47 |
9837/C
Nylon plug for oil seal inserter |
|
|
| 27 |
9411
(KDEP Rif. 2939)
Oil seal connector on (2)17 shaft |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9288
Gliceroil gauge 0-2,5 bar
for pressure charge 0 80 - 3/8 gas |
|
|
| 2 |
9287
Gliceroil gauge 0-1 bar
for inlet pressure 0 80 - 3/8 gas |
|
|
| 3 |
9286
Gliceroil gauge 0-16 bar
for transfer pressure 0 80 - 3/8 gas |
|
|
| 4 |
9657
Vacuum gauge 0-76 mm Hg - 0 80
3/80 gas with reduction and angle pipe |
|
|
| 5 |
9302
Vacuum gauge 0-76 mm Hg |
|
|
| 6 |
9658
Angle pipe for gauges
and vacuum gauges |
|
|
| 7 |
9348
(BH Rif. 1687233012)
Centesima! 30 mm stroke comparator |
|
|
| 8 |
9198
Depth gauge |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 21 |
9248
Puller for the pressure governing
valve bush |
|
|
| 22 |
9203
T wrench for pressure governing valve |
|
|
| 22 |
9611
Torx screwdriver for EPNE pump
casing screw |
|
|
| 23 |
9251
(BH Rif. 1687230029)
Thermometer to check the feed
temperature AT I.S.O. regulations (45°) |
|
|
| 24 |
9858
(KDEP Rif. 1152)
Checking seI for "MS" level determination
on EPNE with LDA |
|
|
| 25 |
9858tA
(KDEP Rif. 1169)
"MS" level checking. Fixed lockwire
to adjust the sleeve starting
stroke..on EPNE pumps with LDA
(CITROEN, PEUGEOT,etc.) |
|
|
| 1 |
9826
Tool kit for
extracting, inserting and drill
boring bearings of 0 17 shaft on EPNE (1/2 mm fixed bore) |
| |
Bare reamer 0 17 9826/A |
| a |
9828
Enlarged bearing (16,50original
diameter) |
| 2 |
9827
Tool kit for extracting, inserting and drill boring bearings of 0 20 shaft on EPNE
(1/2 mm fixed bore) |
| |
Bare reamer 0 20 9827/A |
| a |
9829
Enlarged bearing (19,50original diameter) |
| |
|
| a |
9830
Hand milling cutter for boring gear cam seats in EPNE housing;
maximum bore 0,2. Operation to be done after replacement and boring of VE bushings |
|
|
|
 |
|
| 1 |
9558
(KDEP Rif. 1110)
Toothed wrench with 1/2" square to unloose
and clamp the threaded ring of the spark lead
and idling self-Ioading adjusting device |
|
|
| 2 |
9559
(KDEP Rif. 1109)
Assembly and disassembly tool for the spark
lead and idling self-Ioading adjusting device |
|
|
| 3 |
9370
Expansion puller for EPNA...VE pump oil seal |
|
|
| 4 |
9154
Coupling for BH/CAV pumps (2)34,5 mm gear |
|
|
| 4 |
9155 |
|
|
| 4 |
9255 |
|
|
| 4 |
9350
es.: 131/132...ingrano(2)39
Coupling SOFIM . |
|
|
| 4 |
9854
Coupling (2)28,5 Toyota . |
|
|
| 4 |
9862
Coupling for BH pumps (2)29 FIAT 90/110 |
|
|
| 5 |
9038
Fixing gear wrench for CAV/BH pumps (2)34,5 |
|
|
| 5 |
9043
Fixing gear wrench for BH pumps (2)33 |
|
|
| 5 |
9349
Fixing gear wrench for CAV/BH pumps (2)39 |
|
|
| 5 |
9863
Fixing gear wrench for BH pumps (2)29 |
|
|
| 6 |
9576
Motaring coupling cone (2)17 - 33 length |
|
|
| 6 |
9473
Motoring coupling cone (2)17 - 70 length |
|
|
| 6 |
9577
Motaring coupling cone (2)17 - 100 length |
|
|
| 6 |
9460
Motaring coupling cone (2)20 - 70 length |
|
|
| 6 |
9578/A
Motaring couplmg cone (2)20 - 60 length
splme 2 mm for BHNE pumps |
|
|
| 6 |
9578
Motoring coupling cone (2)20 - 100 length |
|
|
| 7 |
9873
Cushioned motorlng coupling at 4008/1
safety rules. Equipped wlth reduction
for noI very recent BOSCH test bench.
Coupllng (2)115mm |
|
|
| 7 |
9873/A
4008/1 ISO coupling for MAGASA
test bench (F115).Coupling (2)110mm |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9875
Fixture kit to extract
the "toothed" coupling
0 28 - 33 - 39 |
|
|
| 2 |
9875/A
Two reductions 0 28 |
|
|
| 3 |
9875/8
Two reductions 0 33 |
|
|
| 4 |
9875/C
Two reductions 0 39 |
|
|
| 4 |
9875/D
Slide bush |
|
|
| 4 |
9875/E
Puller body |
|
|
| 4 |
9455
Puller for "toothed"
coupling 0 33 (example: OPEL) |
|
|
| 4 |
9463
Puller useful for ali our conic and toothed
motoring couplings 45x1,5 |
|
|
| 4 |
9219
(KDEP Rif. 2918)
Puller 3 Threads for Simms
36x1,5 M, 26x1,5 M, 20x1,5 M |
|
|
 |
|
| 1 |
9478
(BH Rif. 1685720062)
Test bed flange
for EPIVA...VE...CAVpumps |
|
|
| 2 |
9356/A
Swivel vice for operative flanges
of PES...A,VE, VA pumps etc.
(flange not included) |
|
|
| 3 |
9402
Swivel vice flange (9260)
with rotatory movement for PES...A,
VA-VE BOSCH, CAV and M pumps
(equipped with our art. 9600) |
|
|
| 4 |
9600
Plate with square seat for bench vice |
|
|
| 4 |
9601
(BH KDEP Rif. 2963)
Swivel vice cradle (9356-9260)
for operative flanges |
|
|
| 4 |
9205
Swivel vice frange for EPIVA...VE |
|
|
| 4 |
9260
Slewing bed |
|
|
| 4 |
9680/A
(BH Rif. 1688010124)
New BOSCH test bench
ISO normative bed cradle
axle 125 - slide 20 |
|
|
| 4 |
9644
Shim to use with BOSCH bracket far
HARTRIDGEtest bench - height 21,5 mm |
|
|
| 5 |
9425/A
Cradle thickness 9680/A for
Guzzelloni test bed. |
|
|
| 5 |
9074
Shim to apply to BOSCH
brackets for Magasa test bench
h. 75 mm. |
|
|
| 5 |
9644/A
Cradle thickness 9680/A BOSCH
h. 45 mm for Odolini test bench. |
|
|
|
inviaci un e-mail
inviaci un fax al
n. 
chiamaci al n. 