Company

Headquarters

News

Offers

Reserved area

Marks

Info

Home

1 9851 Turbo testing instrument This tester checkes the maximum pressure BAR on LDA and on the exhaust manifold It also checkes the exhaust gas temperature. This checking musI be don e on the molar vehicle.

9852   kit for our art.9851   Figura 1 A drilled bolt 12xl,5 with clutch for nylon pipe to assemble to LDA.IVECOand SCANIAtrucks, FIATand other tractors     Figura 2 A drilled bolt 12xl,5 lo assemble to LDA wilh eye union. fVECO, SCANIA and other trucks. Double drilled bolt     Figura 3 One eye union '" 12 for nylon pipe '" 8 int.     Figura 4 A drilled bolt 14x1,5with c'utch for nylon pipe to assemble to LDA.IVECOand SCANIAtrucks, FIATtractors etc.     Figura 5 Eye union '" 14 for nylon pipe '" 8 int.     Figura 6 A drilled bolt 8xl to assemble lo LDA. On european Diesel cars     Figura 7 A double drilled bolt the same like above     Figura 8 Two '" 8 eye connectors for nylon pipe '" 8 mt.     Figura 9 IO cm nylon pipe '" 8 int. to be used like conjunction with the pipe given with the instrument '" 6 int.     Figura 10 Two clamps for nylon pipes clamping     Figura 11 One union with three ways for middling applications pipe of pressure feed on cars and trucks     Figura 12 '" 9 bit drill to drill manifolds     Figura 13 10x1 screw tap to work on manitold     Figura 14 The conjunctons 10xl to put on manifolds. (Inserting the nylon pipe in Ihat connector you can survey the pressure)     Figura 15 Ten reducing nuts with '" 3 hole, 10x1 thread to insert the temperature leeler     Figura 16 Ten blind plugs to screw on conjunction No 14 when the operation is over. (We suggest a drop of "Loctite" our art. No. 9759).

1 9594/A New manometric assemby for the LDA testing bench. Manometer 0-2,5 armored, shock resistant with steel inox mechanics. 9593 Metering valve 9592/A new armared manometer 0-2,5 shock resistant, with steel inox mechanics

LDA Governing delivery valve   1 9853 a) Diesel pressure testing squirt + 1,5 bar on turbosupercharger, lDA flow adjusting valve, turbines etc. b) Vacuum testing squirt - 1000 mbar on gasoli ne turbosupercharger, valve filters, diaphragm for diesel pump governor   2 3 4 9858  (KDEP Rif. 1152) Fixed checking seI to adjust the sleeve starting travel. "MS" level on EP/VEwith LDA 5 9858/A  (KDEP Rif. 1169) Fixed checking seI to adjust the sleeve starting travel. "MS" I.~velon EP/VE pumps. (CITROEN, PEUGEOT,etc.) 6 9641  (BH. Rif. 1688130032) Depression gauge for diaphragm, SCANIA, ValVa etc. 6 9642  (BH. Rif. 1688130132) Bare valve for the above 6 9643  Bare air depression gauge

SYSTEM INJECTION EQUIPMENTS

inviaci un e-mail  info@dieselevante.com inviaci un fax al n.   +39 080.5357579 chiamaci al n.    +39 080.5357615

Diesel Levante Srl -  Headquarters  S.S. 96 Km. 116 - 70026 Modugno (Ba) - Italy Tel +39 080.5357615 - Fax +39 080.5357579 E-mail: info@dieselevante.com