Equipment for fuel nozzles and nozzle holders 10.015		1 9697  Wrench box for the tightening of nozzle holder nuts      2 9785 Williams dynamometric wrench     3 9737 Wrench for injectors FIAT RITMO (STRADA)/GOLF     4 9755 Wrench for injectors BMW     5 9749/A Wrench for pipe nuts     6 9031 27 mm wrench for nozzle holders     7 9791 Box with 480 balanced washers far BOSCH nozzle holders wide type     8 9792 Box with 400 balanced washers far CAV nozzle holders narrow type     9 9148/8 Quick joint far nozzles testing pump     10 9375 Hand injectors tester     11 9040 Electric pen     12 9352 Two handles spanner eyelet 17/19/22 hex 22     13 9353 Two handles spanner eyelet 20 hex 25     14  9353/A Two handles spanner eyelet 22/24 hex 27     15 9351 Two handles spanner hex 17/19/20     16 9784 Clamp for nozzle holders CX-BX     17 9571 Clamp for CAV nozzle holders     18 9512 Clamp for nozzle holders on FIAT/VM     19 9397/A Four holes clamp far MERCEDES-OPELetc.     20 9794 Stroke puller for flame traps     21 9757 Tool-set for the adaptation of enlarged overflow pipes on nozzle holders     22 9796 Store-box for component parts of disassembled nozzle holders and pumps     23 9700/A Special tool for nozzle cleaning     24 9700 Nozzle cleaning tool Kit     25 9372 Assorted box with adjusting shims
Work-table for tuel nozzle and nozzle holders maintenance equipped with 25 articles. Total weight: 170 kilos Wark table and panel weight in assembling kit:130 kilos Dimensions: Work-table 90x150x75 / Panel 80x150

10.015/A     Plain work-bench with drawers, vice and choice of 20 hooks, Total weight: 130 in assembling kit Dimensions: Work table 90hx150x75 Panel 80x150                10.015/B     Plain work-bench with vice and choice of 20 hooks Total weight: Kg, 95 in assembling kit Dimensions: Work table 90hx150x75 Panel 80x150

Spanner for diesel cars and trucks		1 9351 Two handles spanner hex 20 mm, hex 19 mm, hex 17 mm      2 9352 Two handles spanner eyelet 17 mm, eyelet 19mm, eyelet 22 mm, hex 22 mm     3 9353 Two handles spanner eyelet 20 mm, hex 25 mm     4 9353/A Two handles spanner eyelet 24 mm, eyelet 22 mm, hex 27 mm     5 9397/A Four holes clamp for Bosch nozzle holders on MERCEDES, OPEL, VOLKSWAGEN, FIAT (127, Regata etc.) ValVa, AUDI, etc.     6 9509 Clamp with 22 mm mark for Bosch on OPEL nozzle holders     7 9512 Clamp for Bosch nozzle holders on FIAT, Sofim engines, 131-132 Ritmo and VM (Alfetta)     8 9571 Clamp for CAV nozzle holders on GOLF, TALBOT PEUGEOT etc.     9 9784 Clamp for Bosch and CAV nozzle holders on CITROEN CX and BX and on FIAT 242 (Citroen engine)     10 9571/A Clamp for Bosch nozzle holder on POLO VOLKSWAGEN
Clamps for diesel cars
Spanners and clamps for the dismounting of nozzle holder nuts on diesel cars and trucks

Wrench box for the tightening of nozzle holder nuts with dynamometric key as established by ali car industries both for diesel cars and trucks

9697   1 Box with following: hex socket wrench 14 mm hex socket wrench 19 mm hex socket wrench 20 mm hex socket wrench 27 mm hex socket wrench 22 mm eyelet wrench 22x 19 mm eyelet wrench 22x24,5 mm eyelet wrench 20x22 mm eyelet open milled 19 mm     9785   5 Williams dynamometric wrench for these collets with tightening from 3 kgm to 13 kgm square connection 1/2 inch     9785/A   6 ~ms dynamometric wrench from kgm 0,5 to kgm 7 square connection 1/2 inch

Clamps for the dismounting and re-assembling for nozzle holder on diesel trucks and tractors           1 9021 FIAT (690, 697, BVetc.) nozzle holder clamp           2 9023 FIAT OM (615) nozzle holder clamp           3  9024 SAME tractors nozzle holder clamp           4 9723 LOMBARDINI tractors nozzle holder clamp            5 9022 FIAT Unic (8igma nozzle holder on OM 150 nozzle holder clamp          6 9355 IVECO (50 NC, OM 40) nozzle holder clamp         7 9535 BOSCH KBEL 828166/4 trucks nozzle holder clamp FIAT 130 - OM 100 - OM 120 engine CP3 - CO3          8 9340 SCANIA nozzle holder clamp         9 9340/A PERKINS, FORD TRANSIT nozzle holder clamp         10 9725 LAND ROVER, LEYLAND nozzle holder clamp         11 9786 IVECO (OMAP OMT nozzle holders on Fiat 170 - Fiat 190 etc.) nozzle holder clamp         12 9787 MERCEDES SCANIA trucks and coaches nozzle holder clamp         13 9788 BO8CH KBEL 1O3P21 MERCEDES engines nozzle holder clamp (MENARINI coaches)         14 9363 BO8CH KBAL Z 150867 ISOTTA FRASCHINI engines nozzle holder clamp         15 9365 FORD 5000 nozzle holder clamp

9791 1 Boxwith480 balancedwashersfar Boschnozzleholderswidetype        9792 2 Boxwith480 balancedwashersfar CAV nozzleholdersnarrowtype        9372 3  Boxwith1.500mixed distancespacersfar nozzleholders                Balanced washers  1           9791.1 9791.2 9791.3 9791.4 9791.5 9791.6 9791.7 9791.8 9791.9 9791.10 9791.11 9791.12 9791.13 9791.14 9791.15 9791.16 9791.17 9791.18 9791.19 9791.20 9791.21 9791.22 9791.23 9791.24 11,5 x 5,2 x 0,80 11,5 x 5,2 x 0,85 11,5 x 5,2 x 0,90 11,5 x 5,2 x 0,95 11,5 x 5,2 x 1.00 11,5x5,2x1,05 11,5x5,2x1,10 11,5x5,2x1,15 11,5 x 5,2 x 1,20 11,5 x 5,2 x 1,25 11,5 x 5,2 x 1,30 11,5 x 5,2 x 1,35 11,5 x 5,2 x 1,40 11,5 x 5,2 x 1,45 11,5 x 5,2 x 1,50 11,5 x 5,2 x 1,55 11,5 x 5,2 x 1,60 11,5 x 5,2 x 1,65 11,5 x 5,2 x 1,70 11,5x5,2x1,75 11,5 x 5,2 x 1,80 11,5 x 5,2 x 1,85 11,5 x 5,2 x 1,90 11,5 x 5,2 x 1,95                Balanced washers  1           9792.1 9792.2 9792.3 9792.4 ' 9792.5 9792.6 9792.7 9792.8 9792.9 9792.10 9792.11 9792.12 9792.13 9792.14 9792.15 9792.16 9792.17 9792.18 9792.19 9792.20 9792.21 9792.22 9792.23 9792.24 9,8 x 4,1 x 1,00 9,8 x 4,1 x 1,05 9,8x4,1x1,10 9,8x4,1x1,15 9,8 x 4,1 x 1,20 9,8 x 4,1 x 1,25 9,8 x 4,1 x 1,30 9,8 x 4,1 x 1,35 9,8 x 4,1 x 1,40 9,8 x 4,1 x 1,45 9,8 x 4,1 x 1,50 9,8 x 4,1 x 1,55 9,8 x 4,1 x 1,60 9,8 x 4,1 x 1,65 9,8x4,1x1,70 9,8x4,1x1,75 9,8 x 4,1 x 1,80 9,8 x 4,1 x 1,85 9,8 x 4,1 x 1,90 9,8 x 4,1 x 1,95 9,8 x 4,1 x 0,80 9,8 x 4,1 x 0,85 9,8 x 4,1 x 0,90 9,8 x 4,1 x 0,95                Spacers for nozzle holders  2    9372.1 11,5 x 5,1 x0,05 For nozzle holders FIAT car (es. Strada) 9372.2 11,5x5,1x0,1 9372.3 11,5x5,1xO,2 9372.4 10 x 3 x 0,05 For nozzle holders BH car 9372.5 10 x 3 x 0,1 9372.6 10 x 3 x 0,2 9372.7 9 x 4,2 x 0,05 For nozzle holders CAV car 9372.8 9 x 4,2 x 0,1 9372.9 9 x 4,2 x 0,2 9372.10 11 x 7 x 0,05 For nozzle holders BH car (Mercedes) 9372.11 11 x 7 x 0,1 9372.12 11 x 7 x 0,2 9372.13 7,5 x 3,6 x 0,05 For nozzle holders NIPPONDENSO and XEXEL 9372.14 7,5 x 3,6 x 0,1 9372.15 7,5 x 3,6 x 0,2

9793		1 9793.1 Flame damper FIAT UNO D 0 20,5 x 0 5,5 diff. O, 5      1 9793.2 Flame damper VW GOLF 0 20,5 x 0 5,5 diff. 0,2     4 9793.3 Flame damper VM (ALFA) h 13 x 0 17,5     1 9793.4 Flame damper MERCEDES 0 20,5 x 0 8 difl. 0,5     4 9793.5 Flame damper FIAT Sofim - Ritmo h 13 x 016     4 9793.6 Flame damper OPEL h 14 x 0 17,3     3 9793.7 Plate flame trap FORD 5 x 14 x 1,1     3 9793.8 Plate flame trap OPEL 5 x 14 x 1,1     5 9793.9 Brass flame damping washer Safim     5 9793.10 Brass flame damping washer OPEL - VM - MERCEDES     2 9793.11 Brass washer for nazzle base 17 x 21 x1,5 (es. BMW etc.)     6 9793.12 Iran rubber plug for nozzle holder drain terminai (Bosch-CAV)     9793.13 Brass washers 0 6     9793.14 Brass washers 0 8
Cassetta di parafiamma e rondelle per portainiettari. (Contenuto n. 512 pezzi) Box with flame dampers and washers for nozzle holders. (Contents no. 512 pieces)

9510   Box with puller and reductions for ali nozzle holders (9 articles - 10 pieces)         1 9047  Nozzle holder puller with joint head   2 9468  Reduction for 9047 for IVECO nozzle holder - 8 x 1   3 9469  Reduction for 9047 for IVECO nozzle holder - 8 x 1,25   4 9470  Reduction for 9047 for CAVnozzleholder - 8xO,75 5 9603  Reduction for 9047 for SCANIA nozzle holder 6 9050  Reduction for 9047 for nozzle halder precombustion chamber af MERCEDES cars 7 9258  Reduction for 9047 for SIGMA RM-RMS nozzle holder 8 9049  Reduction for 9047 for IVECO nozzle holder 9 9051  Sickle reduction for 9047 for nozzle holders on tractors

1 9794 Stroke puller for flame traps   9794/A Bare male   2 9794/B Conical reduction for puller for flame dumper after the notching of the thread when the extraction is difficult   3 9147 Wrench for fixed ring of the precombustion chamber on MERCEDES   4 9147/A Assembling and disassembling wrench of the fixing ring for precombustion chamber on FIAT (127/D, UNO D etc.)         5 9796/8 Store-box for component parts 8 cyl. of disassembling nozzle holders pumps. 6 9796/A Store-box for component parts of rotary pumps during the disassembling 7 9040 Electric pen 9040/A Spare pen 9041 Pen-nib

1 9375 Hand injector similar BOSCH tester with isolating manometric valve     2 9227  Pipe for injector test pump for John Deere Caterpillar nozzle holder     3 9228  Caterpillar U.T. Injector test pump reduction for Caterpillar nozzle holder     4  9148/8  Patented quick connection for injectors with thread 12,5x1,5 and 14x1,5 for test injector pump     4 9148/C  Quick connection16x1,5- 20x1,5     4 9148/D  Rapid connection18x1,5- 22x1,5     5 9032  Universal tool to test injectors     6 9033 SIGMA and F.B. injector tester     7 9259 SIGMA injector tester RM-RMS 22x1,5     8  9034 SIGMA and F.B. injector tester

9700		1 9691 Little brass brush for nozzles      2 9002 1,2 mm twist drill to clean the nozzle cup     3 9003 Piano wire     4 9004 10 Stubs conical needle     5 9005 Steel wire brush for nozzle cleaning     6 9006 Hair brush for nozzle cleaning     7 9007 Heavy head spindle - 0 3 mm pliers     8 9008 Spindle with zero closing for piano wire      9 9009 New spmdle 0 2,2 mm pliers     10 9252 Zero closing pliers     10 9256 0 3 mm closing pliers     11 9688 Magnifying lens     12 9689 Enveloped lens     13 9013 Polishing and emery paste - grain 320      14 9014 Polishing and emery paste - grain 400 1     15 9015 Polishing and emery paste - grain 600     16 9017 Lapping compound - Paris red     17 9018 Lapping compound - chrome green
Cassetta pulizia ugelli (17articoli - 19 pezzi) Nozzle cleaning tool kit (17 articles - 19 pieces)

1 9691 Litte brass brush for nonles   9002 of the nonle cup   2 9003 Piano wire packet in three sizes for nozzle holes 0,12 - 0,20 - 0,30   3 9004 Little case with 10 conical stubs needles in different size 0,05 - 0,07 - 0,10 etc.   4 9005 Steel brush lo clean the nozzle stop nuts   5 9006 Hair brush for nonle cleanlng   6 9007 Heavy head spindle with 0 3 mm pliers   7 9008 Spindle with zero closing for piano wire and stubs needles   8 9009 New spindle with 0 2,2 mm pliers for nonles   9 9252 Zero closing pliers for our arif. 9007 and 9009   10 9257 0 2,2 mm pliers for our art!. 9007 and 9009   10 9256 0 3 mm pliers for our artt. 9007 and 9009 10 9688 Magniflng lens 11 9689 Enveloped lens for nozzle inspection 12 9013 abrasiva grana 320 13 9014 Polishing and emery paste - grain 400 13 9015 Polishing and emery paste - grain 600 13 9016 Polishlng and emery paste - grain 1000 13 9017 Lapping compound red Paris original diamant nel weighl 5 grs. 13 9018 Lappingcompound- chromegreen nel weight 5 grs. 13 9019 Lapplng compound red Parls original diamant net welght 125 grs.

9700/A		1 9700/1 Cleaning pin      2 9700/2 Cleaning pin     3 9700/3 Cleaning pin     4 9700/4 Metal brush     5 9008 Pin vice     6 9700/6 Inserting pins tool     7 9700/7 12 pins seI with:       Cleaning pin 0 3        Cleaning pin 0 2.8       Cleaning pin 0 2.6       Cleaning pin 0 2       Cleaning pin 0 1.9     Cleaning pin 0 1.8     Cleaning pin 0 1.5     Cleaning pin 0 1.4     Cleaning pin 0 1.3     Cleaning pin 0 1.2     Cleaning pin 0 1.1     Cleaning pin 0 1
Cassetta pulizia iniettari (Rif.KDEP 2900) Special taci for nazzle cleaning (KDEP rif. 2900)

9757 Tool-set for the adaptation of enlarged overflow pipes on CAV and BOSCH nozzle holders. The Kit supplied with a guide base, two calking tools, two drills and twenty pipes, short and long type, permits to repair the old nozzle holder. After the enlargement of the hole, the enlarged pipe is to be inserted with a drop of Loctite. 2 9758  Spare overflow pipes for above mentioned item 3 Spare overflow pipes for above mentioned item 9758/A     9790 Tool-kit to insert and pull the nozzle holder dowel bol!. It enables a righI extraction of the old broken bolt and the insertion of the new one at fixed leve!. Kit comprehends: .  Orill die .  Orilling die .  Centering bushes in three interchangeable sizes for nozzle holder .  Orill table .  Inserting pin for nozzle dowel bolts .  Elastic nozzle dowel bolts (10 pcs.) 2 9789  Elastic nozzle dowel bolts

Ultrasonic cleaner     9698/VL2 Transistorized ultasonic box with automatic setting. Made of stainless steel with a capacity of 1,7 litres for special fluid for componets. The box equipped with timer is supplied with a stainless steel basket for containing parts and 3 fluid bottles. Technical features: Inside dimensioncm 21,6x11 ,75x7,62 Frequency 60Khz - Capacity 1,7 litres - 45Watts - 127 W-peak Made in USA   9698/VL3 Transistorized ultasonic box with automatic setting. Made of stainless steel with a capacity of 1,9 litres for special fluid for componets. The box is equipped both with heater and timer it is supplied with a stainless steel basket for containing parts and 3 fluid bottles. Technical features: Inside dimension cm 14,9x13,6x10,2 Frequency 60Khz - Capacity 1,9 litres - 45Watts - 127 W-peak Made in USA   9698/A Biodegradable fluid in package of 0,500 litres for diesel and electronic components.   9698/C Biodegradable fluid in package of 5 litres for diesel and electronic components.   9896 Stainless steel plate for electro-nozzles.

SYSTEM INJECTION EQUIPMENTS

inviaci un e-mail  info@dieselevante.com inviaci un fax al n.   +39 080.5357579 chiamaci al n.    +39 080.5357615

Diesel Levante Srl -  Headquarters  S.S. 96 Km. 116 - 70026 Modugno (Ba) - Italy Tel +39 080.5357615 - Fax +39 080.5357579 E-mail: info@dieselevante.com