|
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9166
(Rif. KDEP 2986)
Toothed wrench with 1/2" square |
| 2 |
9167
(Rif. KDEP 2997)
Open toothed wrench for pressure
unions, for delivery adjustment |
| 3 |
9730
Open toothed wrench for pressure
unions, for delivery adjustment |
| 4 |
9168
(Rif. KDEP 2911.2.1)
Pumping group puller with 25,5 mm
height reductions |
| 5 |
9169
(BH Rif. 9682238900)
Jig to use with our arI. 9168
to keep in a righI position the pumping
group during the reassembly |
| 8 |
9881
Equalizer comparator bearing
with returning spring
and reductions for rod share A-B-BV
and P BOSCH pumps.
Suitable even for hand comparators |
|
|
 |
|
| 1 |
9500
(BH Rif. 1687233015)
Decimai comparator 30 mm stroke
for rack rod share |
| 2 |
9502
(BH Rif. 1688130030)
Dial gauge bearing for rod stroke
thread 24x1,5 protrusion 18 mm
for PE...Ppumps
(Clamp included - our arI. 9502 A) |
|
9502/A
Clamp with two rods (spare pari) |
| 2 |
9502/K
(BH Rif. 1683350064)
Dial gauge bearing for rod stroke
thread 26x1,5 protrusion 27 mm
for PE (S)...MW pumps |
| 3 |
9173
(KDEP Rif. 2962)
Pumping group disassembly clamp |
| 4 |
9174
(BH Rif. 1688130085)
PE...PS80 pumps dial gauge bearing
to survey the delivery start leve!.
Connection 24x1,5 mm. Equipped
with stiffening washer (Rif. 1420100001)
for the application on P 7800 pumps |
| 4 |
9117
Attacco mm 16x1,5
(BH Rif. 1688130021)
PE...Ppumps dial gauge bearing to survey the
delivery start leve!. Connection 16x1,5 mm |
| 4 |
9513 KB
(BH Rif. 1688130135)
Dial gauge bearing to survey
the delivery start level for PE (S)...MW pumps.
Connection 18x1,5 mm |
| 5 |
9717
Dial gauge bearing to survey the delivery
start level on FRIEDMANN MAYER pumps
equipped with three connections:
20x1,5 - 24x1,5 - 26x1,5 mm |
| 6 |
9331
(KDEP Rif. 2970)
p BOSCH pumps toothed wrench for rod ring |
| 7 |
9331/A
(KDEP Rif. 2970)
p BOSCH pumps toothed wrench
for oversize rod ring |
| 8 |
9683
Dial gauge bearing for rod level
on P BOSCH pump with LDA device |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9410
(Similar to KDEP Rif. 2910)
Eccentric tappet fifter |
| 2 |
941O/A
Eccentric tappet fifter
with casing guide threaded body |
| 3 |
9525
(KDEP Rif. 1041)
Runner tappet fifter with casing
guide threaded body |
| 3 |
9525/A
Pompe P su SCANIA 141,142 ecc.
New tapper fifter strengthened runner
suitable for a better lift of the tappe!.
p pumps on SCANIA 141,142 etc. |
| 4 |
9636
(KDEP Rif. 2884)
Rubber ring inserter far
the pumping group |
| 5 |
9637/A
Steel ring inserter
in the pumping race |
| 5 |
9637/8
Spare conic bush |
| 6 |
9622
(KDEP Rif. 1071)
Wrench for the guide bushing
of the pumping |
| 7 |
9503
(KDEP Ref. 2920)
Toothed wrench for pressure unions
for PE...ZW (M) pumps
with 1/2" square connection |
|
|
 |
|
|
|
| 1 |
9628
(KDEP Rif. 2899)
Checking gauge for the protrusion level
0117 and 20 mm camshaft cones |
| 1 |
9629
(KDEP Rif. 2924 - BH 25/30)
Checking gauge lor the protrusion leve!
0125 and 35 mm camshaft cones |
| 1 |
9812
(KDEP Rif. 2971 - BH 25/35)
Checking gauge lorthe protrusion level
0130 e 35 mm camshaft cones |
| 2 |
9625 (Rif. KDEP2890) .
(KDEP Rif. 2890)
Jig to measure the bearing and IIoat
on 0 17 shaft (dial gauge noI included) |
| 2 |
9626
(KDEP Rif. 2927)
Jig lor 0 20 shaft |
| 2 |
9627
9813 |
} |
(KDEP Rif. 2967)
Jig lor 0 25 shalt
(KDEP Rif. 2882)
Jig lor 0 30 shaft |
| 2 |
9814
(KDEP Rif. 2889)
Jig lor 0 35 shaft |
| 3 |
9624
(BH Rif. 1682329038)
Fixed checking dial gauge to survey
the protrusion level
01the elastic ROA-ROB adjustment |
| 3 |
9624/A
(Rif. 1682329081)
Checking gauage to survey the protusion
dimension 01the elastic pins on ROV...K
governar.
New dimension 37,1 mm |
| 5 |
9815
(KDEP Rif. 1548) / 0 30 shaft sleeve |
| 5 |
9816
(KDEP Rif. 1549) / 0 35 shaft sleeve |
|
|
 |
|
| 1 |
9139
6 mm RISE screwdriver
for P pump screw |
| 2 |
9140
6 mm RISE screwdriver
for P pump screw |
| 2 |
9748
Positioning bracket for P pumps
on MERCEDES trucks etc. |
| 3 |
9091
(KDEP Rif. 2886)
Mass holder puller for ROA
adjustment 20x1,5 |
| 3 |
9092
(KDEPRif. 2872)
Mass holder puller for RQB
adjustment 24x1,5 |
| 4 |
9094
Torque converter puller 28x1,5' |
| 4 |
9095
Torque converter puller 32x1,5 |
| 5 |
9612
(KDEP Rif. 2856)
Torque converter puller 30x1,5 |
| 5 |
9623
(KDEP Rif. 2965)
Flywheel puller 36x1,5 |
| 6 |
9463
(KDEP Rif. 2916)
Coupling and hub puller 45x1,5 |
| 6 |
9219
(KDEP Rif. 2918)
Double thread puller 20x1,5
26x1,5- 36x1,5
(KDEP Rif. 2858) / Puller 33x1,5 |
| 6 |
9553
(KDEP Rif. 2921)
reduction with 1/2" double square |
| 6 |
9873
(BH Rif. 1686401028)
Cushioned motoring coupling at 4008/
safety rules. Equipped with reductions
for noi very recent SOSCH test bench.
Coupling 0 115mm |
| 7 |
9873/A
4008/1 ISO coupling for MAGASA
test bench (F115).Coupling 0110 mm |
|
|
|
inviaci un e-mail
inviaci un fax al
n. 
chiamaci al n. 