10019   Pressing unii for double spring nozzle holder and common-rail nozzle holders Tool for tightening the nozzle check nut without any kind of rotation of the injector Patented tool. This tool is provided with a ball grip enabling the fasI sliding of the central piston. The pressure done keeps fixed and in axis the nozzle in the nozzle holder housing. The nozzle holder is driven by the proper interchangeable plates. At last our wrench 8101 is used for tightening, mounted on the dynamometrical wrench 9785/A The tool is supplied with 7 different plates and a reduction for nozzle holders "s" cuI.       1 9785/A  Dynamometrical wrench 0,5-7 kgm.       2 8101  Wrench with square 1/2" and with driven hexagon mm 15.

1 Reduction bearing for nozzle press 10019 far extended nozzle holders (ex. BMW-IVECO EUROCARGO) 10019/A     2 Plate no. 8 for BMW nozzle holders to be used with bearing 10019/A. 10019/8     3 10019/9 Plate no. 9 for common rail nozzle holders on IVECO EUROCARGO to be used with bearing 10019/A.     4 8101 Wrench with square 1/2" and with driven hexagon mm. 15 for common rail nozzle holders and double-stage nozzle holders.     5 8099  Common rail nozzle holder puller on IVECO, EUROCARGO TECTOR complete with blow-puller.     6 8099/A Common rail nozzle holder puller on Mercedes Class "A" complete with blow-puller.     7 8099/B  Pump/Iniector puller UIS Unit Iniector Sistem on Lupo Volkswagen.     8 Common rail nozzle holder puller on alfa 156, fiat marea     8 8100/A  Common rail nozzle holder puller on fiat daily and so on

SYSTEM INJECTION EQUIPMENTS

inviaci un e-mail  info@dieselevante.com inviaci un fax al n.   +39 080.5357579 chiamaci al n.    +39 080.5357615

Diesel Levante Srl -  Headquarters  S.S. 96 Km. 116 - 70026 Modugno (Ba) - Italy Tel +39 080.5357615 - Fax +39 080.5357579 E-mail: info@dieselevante.com