|
|
|
|
| AZ0037-01 |
|
4 reamers kit for Common Rail injectors |
|
|
|
|
|
Tool kit for cleaning the internal side of the engine.For flat and conical Common Rail nozzleholders -Delphi and Bosch type. |
|
|
|
| AZ0037-21A |
|
Flat reamer diam. 21mm. |
|
|
|
|
|
|
Flat reamer for cleaning the internal seat of the engine where the Tector Common Rail Bosch nozzleholders lay |
|
|
|
| AZ0040-00 |
|
Tool kit for lapping the commn rail injectors seat |
|
|
|
|
|
|
Lapping kit that also enable to rebuilt the seat of the conic seat of the closing valve positioned under the c.r. injector solenoids.
|
|
|
|
| AZ0134-278 |
|
Diagnostic tool kit for Common Rail pumps |
|
|
|
|
|
|
This kit allows to check the pressure of Common Rail pumps (CP1, CP3, Delphi and Siemens) without dismounting the pump from the engine.
|
|
|
|
| AZ0018-01 |
|
Tool kit for CP1 pumps |
|
|
|
|
|
|
Tool kit equipped for mounting and dismounting bearings for the radial-jet pumps.Included 5 kit of spare bearings |
|
|
|
| AAZ034-07 |
|
Adaptor for pressure -Delphi- |
|
|
|
|
|
|
Connector for the sensor of transfer pressure for Common Rail Delphi pumps. |
|
|
|
| AAZ034-08 |
|
Adaptor for pressure -CP3- |
|
|
|
|
|
|
Connector for the sensor of transfer pressure for Common Rail CP3 pumps. |
|
|
|
| AAZ034-09 |
|
Rapid connection for CR nozzleholders |
|
|
|
|
|
|
Rapid connection for all kind of Common Rail nozzleholders.To be used on test bench with Common Rail simulator tester. |
|
|
|
| AAZ034-15 |
|
Adaptor for pressure -CP1H/CP3- |
|
|
|
|
|
|
Connector for the sensor of transfer pressure for Common Rail CP1H/CP3 pumps. |
|
|
|
| AAZ034-16 |
|
Adaptor for pressure -Siemens- |
|
|
|
|
|
|
Connector for the sensor of transfer pressure for Common Rail Siemens pumps. |
|
|
|
| AAZ034-17 |
|
Adaptor for pressure -Denso- |
|
|
|
|
|
|
Connector for the sensor of transfer pressure for Common Rail Denso pumps. |
|
|
|
| AC0500-00 |
|
CR nozzle holder wrench, 29mm. |
|
|
|
|
|
|
Wrench for dismounting solenoid Common Rail nozzle holders.Hexagon 29mm. |
|
|
|
| AC0501-00 |
|
CR nozzle holder wrench, 30mm. |
|
|
|
|
|
|
Wrench for dismounting solenoid Common Rail nozzle holders.Hexagon 30mm. |
|
|
|
| AE0247-04A |
|
Puller for Common Rail nozzleholder (internal) |
|
|
|
|
|
|
Puller for Common Rail nozzleholder, with thread 17x1mm. internal. |
|
|
|
| AZ0128-26 |
|
Tool kit for CR Delphi pump |
|
|
|
|
|
|
Kit for mounting and dismounting the bearing and the seeger on Common Rail Delphi pumps.Similar: YDT367, YDT351, YDT354, YDT356, YDT372. |
|
|
|
| AZ0134-10 |
|
Burettes kit for checking leakage CR |
|
|
|
|
|
|
|
|
|
|
| BR0004-15 |
|
Cummins test adaptor |
|
|
|
|
|
|
Test adaptor to check the injector balancing of EUI/PDE Cummins pumps.To be used on all kind of hand injector tester. |
|
|
|
| AZ0128-218 |
|
Dismounting tool for VP pump - Duratorq |
|
|
|
|
|
|
Dismountig and mounting tool for VP pump on Ford Duratorq 2.0, 2.2 and 2.4 engines. |
|
|
|
| AC0495-00 |
|
Octagonal wrench for solenoid |
|
|
|
|
|
|
Octagonal wrench for mounting and dismounting the solenoid for Bosch/Iveco injector pump. |
|
|
|
| AC0496-00 |
|
Wrench for Volvo Delphi diam. 39mm |
|
|
|
|
|
|
Wrench for mounting and dismounting the fixing nut of injector-pump, new Delphi nozzleholder for Volvo 500Hp. |
|
|
|
| AE0261-00 |
|
Oil seal puller for VP - CP3 |
|
|
|
|
|
|
Oil seal self-threading puller 25mm. for VP and CP3 pumps.It allows to dismount the oil seals without opening/pulling out the pump. |
|
|
|
| AE0265-00 |
|
Couple of pullers for VP couplings, universal |
|
|
|
|
|
|
Couple of pullers high resistant for extacting the motoring couplings on 11 kinds of VP pumps. |
|
|
|
| AG0025-VP |
|
Motoring coupling cone 25 for VP and CP3 pumps |
|
|
|
|
|
|
Motoring coupling cone 25mm. for VP and CP3 pumps. |
|
|
|
| AG0029-VP |
|
VP motoring coupling 29 |
|
|
|
|
|
|
Motoring coupling cone 29mm., for VP Ford Transit.It allows to check the pump on bench without pull out the original motoring coupling. |
|
|
|
| AG0103-VP |
|
VP motoring coupling 44 |
|
|
|
|
|
|
Motoring coupling 4 holes cone 44mm., for VP.It allows to check the pump on bench without pull out the original motoring coupling. |
|
|
|
| AG0130-00 |
|
John Deere motoring coupling 4 holes |
|
|
|
|
|
|
Motoring coupling 4 holes for John Deere.It allows to check the pump on bench without pull out the original motoring coupling. |
|
|
|
| AB0122-01 |
|
Universal clamp injectors |
|
|
|
|
|
|
Universal retaining clamp for mounting and dismounting Common Rail injectors with opening of 11, 12, 13 e 19mm.For Bosch and Delphi injectors.Similar: 0.986.612.786 |
|
|
|
| AB0122-02 |
|
Universal clamp for Volvo, Ducato, BMW injectors |
|
|
|
|
|
|
Universal retaining clamp for mounting and dismounting Common Rail injectors with opening of 14,16 and 20mm. |
|
|
|
| AE0247-04 |
|
Common Rail puller for Bosch |
|
|
|
|
|
|
Common Rail nozzle holders puller for Bosch, thread 27x1mm.To be used with: AAE0226-00 |
|
 |
inviaci un e-mail
inviaci un fax al
n. 
chiamaci al n. 