|
10.016/P |
|
|
|
 |
|
|
| 1 |
9990 |
(Rif.KDEP 1881) |
Tappet Holder |
|
|
|
|
|
|
9984 |
(Rif. KDEP 1884) |
Socket Wrench |
|
|
|
|
|
| 2 |
9987 |
(Rif.KDEP 1888) |
Assembly Tool |
|
|
|
|
|
| 3 |
9986 |
(Rif.KDEP 1714) |
Clip |
|
|
|
|
|
| 4 |
9988 |
(Rif.KDEP 1886) |
Guide Tool |
|
|
|
|
|
| 5 |
9991 |
(Rif. KDEP 1885) |
Centering Tool |
|
|
|
|
|
| 6 |
9989 |
(Rif. KDEP 1887) |
Press in Tool |
|
|
|
|
|
| 7 |
9985 |
(Rif. KDEP 1890) |
Puller |
|
|
|
|
|
|
|
9422/A
New P 8500 pump
bracket couple for
BOSCH test bench |
|
|
|
Pannello di attrezzi per regolatori elettronici EOC per pompe
BOSCH VE, Mercedes, P, R, H
Tools panel for EOCelectronic governors for BOSCH VE, Mercedes, P, R, H pumps |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9990
(Rif. KDEP 1881)
Tappet Holder |
|
|
|
|
| 2 |
9984
(Rif. KDEP 1884)
Socket Wrench |
|
|
|
|
| 3 |
9987
(Rif. KDEP 1888)
Assembly Tool |
|
|
|
|
| 4 |
9986
(Rif. KDEP 1714)
Clip |
|
|
|
|
| 5 |
9988
(Rif. KDEP 1886)
Guide Tool |
|
|
|
|
| 6 |
9991
(Rif. KDEP1885)
Centerlng Tool |
|
|
|
|
| 7 |
9989
(Rif. KDEP1887)
Press in Tool |
|
|
|
|
| 8 |
9985
(Rif. KDEP 1890)
Puller |
|
|
|
 |
|
|
Tool for EDC governar
For P 7100 -P 7800 - P 8500 BOSCH pumps |
|
|
|
|
|
|
|
|
|
|
| 1 |
9992
(Rif. KDEP 1703)
Trasducer ring positioning gauce |
|
|
|
|
|
|
|
|
|
|
| 2 |
9992/A
(Rif. KDEP 1701)
Transducer registering gauce |
|
|
|
|
|
|
|
|
|
|
| 3 |
9992/8
(Rif. KDEP 1702)
Fixing device for pulse wheel |
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
9992/C
(Rif. KDMZ 6999)
Extractor 22x1 |
|
|
|
|
|
|
|
|
|
|
| 5 |
9992/0
(Rif. KDAW9995/3- 9995/14)
Bush extractor tram the governor box |
|
|
|
|
|
|
|
|
|
|
| 6 |
9992/E
Governor bush extractor |
|
 |
|
|
Tool for regulation BOSCH - VE - F
pumps |
|
|
|
|
|
|
|
|
| 1 |
9993
(Rif. KDEP 1179)
Registering tool for drive device of recycle
valve of exhaust gases |
|
|
|
|
| 2 |
9993/A
(Rif. KDEP 1175)
Registering gauge for drive device 01
recycle valve of exhaust gases |
|
|
|
|
| 3 |
9993/8
(Rif. KDEP1176)
Support to use with 9993 |
|
|
|
|
| 4 |
9993/C
(Rif. KDEP 1177)
Tool for regulation on drive lever |
|
|
|
|
|
|
9983 |
|
|
|
(Rif. KDEP 1182 - 1183 - 1184 - 1185)
5-tool kit for extracting ball plugs
of BOSCH VE pump with LDA
with 10 tapped |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9598/6
Wrench for phase holding of pulley on drive
of distribution shaft, cars FIAT. |
|
|
|
|
|
|
| 2 |
Bracket for what above on LANCIA K. |
|
|
|
|
|
|
| 3 |
Bracket for what above on BRAVO/ BRAVA. |
|
|
|
|
|
|
| 4 |
Bracket for what above on FIAT diesel, turbo
diesel 1697/1929 engines. |
|
|
|
|
|
|
| 5 |
9598/L
Wrench for phase start of distribution on
FIATcars (BRAVO/Aincl'd) for defining the
upper dead point on 1sI. cylinder (it musI be
applied on the hook pulley of the engine
shaft). |
|
|
|
|
|
|
| 5 |
9598/LA
Wrench for phase star! of distribution on
Fiat car marea and Lancia K 2,4. |
|
|
|
|
| 6 |
9598/H
pin for phase holding on FIAT ULiSSE. |
|
|
|
|
|
|
| 7 |
9598/M
Engine flywheel and valve gear timing tool.
Daily, turbo DAILY |
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9147/8
Hook wrench for fixed nut on
precombustion chamber, nozzle holders,
cars FIAT, BRAVO and BRAVA. |
|
|
|
|
|
|
|
|
|
|
| 2 |
9598/F
Tool for distribution phase holding on
Fiat, Bravo and Brava cars. |
|
|
|
|
|
|
|
|
|
|
| 3 |
9598/E
Universal adjustable puller for pump side
pulley on cars Fiat, Bravo and Brava,
Volkswagen and so on. |
|
|
|
|
|
|
|
|
|
|
| 4 |
9598/8
Puller for pump side pulley
on Audi Turbo Diesel. |
|
|
|
|
|
|
|
|
|
|
| 5 |
9598/C
Puller for pump side pulley on
Fiat oucato 2,5. |
|
|
|
|
|
|
|
|
|
|
| 6 |
9598/N
Phase holding for distribution
on Renault 190 - R5 - R9 - R11
after 1988. |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9753/A
Stroke survey bracket for BMW 525 TOS. |
|
|
|
|
|
|
| 2 |
9754/A
Pump expeller for BMW 525 TOS. |
|
|
|
|
|
|
|
|
| 3 |
Wrench for exagonal nut. mm. 50 belI
stretcher fixure. BMW 325 TO.
9754/8 |
|
|
|
|
|
|
|
|
| 4 |
3-Side wrench for actuator on VE BOSCH
pump, AUOI, BMW
9754/C |
|
|
|
|
|
|
|
|
| 5 |
9471/9
Comparator support for BOSCHVEpump
mm.8x1. |
|
|
|
|
|
|
|
|
| 5 |
9471/9A
Comparator support for BOSCHVEAUOI
TURBOOIESELpump mm.10x1. |
|
|
|
|
|
|
|
|
| 6 |
9752/8
phase holding tool for OPELCORSA,engine
ISUZU. |
|
|
|
|
|
|
|
|
| 7 |
9755/8
Reinforced hexagonalwrench, open mm.27
for BMW-FIAT-LANCIAK far
nozzle holder with sensor. |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9755/A
Hexagonal reinforced wrench mm. 28
open, nozzle holders of BOSCH with
sensor, ALFA ROMEO VM, ROVER. |
|
|
|
|
|
|
| 2 |
9571/8
Small vice for demounting BOSCH
nozzle holders, exagonal mm. 28,
ALFA ROMEO VM, ROVER. |
|
|
|
|
|
|
| 3 |
9953
Siot extra-flat wrench mm. 22
for demounting nozzle holders
ALFA ROMEO, VM, ROVER. |
|
|
|
|
|
|
| 4 |
9596/8
BOSCH VE pump expeller for
ALFA ROMEO 75 and 33.
(extracts and keeps fasten the timing
system on ALFA ROMEO engines after
1989). |
|
|
|
|
|
|
| 5 |
9596/A
Bosch pump expeller
for ALFA ROMEO 75 and 33 (extracts
and keeps fasten the timing system). |
|
|
|
|
|
|
| 5 |
9596
Bosch pump expeller mm. 22x1 ,5
for ALFA ROMEO 90 (extracts and keeps
fasten the timing system) page 146. |
|
|
|
|
| 6 |
9077/A
Pump expeller for ROVERDISCOVERY. |
|
|
|
|
|
|
| 7 |
9077/8
Phase holding for ROVERDISCOVERY. |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9965
Tool for phase holding MERCEDES 200-250
TD. To be applied after demounting
brackets pump vacum gauge. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 |
9885
Removing wrench for the precombustion
chamber ring on MERCEDES 250 D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 |
9886
Toothed wrench to remove and extract metal
ring and nozzle holder on MERCEDES
TRUCK. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
9050/A
Reduction for nozzle holder
puller precombustion chamber
MERCEDES 250 TD. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5 |
9536/A
Extended wrench for nozzle holder on
MERCEDES serie C mm. 22 hexagonal. |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9899
Very high traction steel puller for bar nozzle
holders on Iveco - Mercedes - Renault -
Man - Fiat - Valva - Scania trucks and so on,
consisting of a threaded pin 14x1,S
and one 12x1,S. |
|
|
|
|
|
|
| 2 |
9899/A
Very high traction mini-puller for bar nozzle
holders on Fiat Ducato i.d. Daily i.d. -
Ford Transit i.d. and so on and for ali those
nozzle holders where there is an hindrance
in the extraction area: connectors, pipes,
preheater and so on consisting of a
threaded pin 14x1,S and one 12x1 ,S.
REMARK: ( nozzle holders always blocked in
their housing due to foulings and fusI
caused by water). |
|
|
|
|
|
|
| 1 |
9044
Stanadyne nozzle holders puller
(John Deer). |
|
|
|
|
|
|
| 2 |
9044/8
Reduction for 9044 for Caterpillar and Ford
Transit nozzle holders |
|
|
|
|
|
|
| 1+2 |
9044/A
3 piece puller for STANADYNE
nozzle holders, CATERPILLAR and
on Ford Transit |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
9536/8
Disassembly wrench of first instrumental
injector holder equipped with sensor
connected to the gearbox hexag mm 22 far
MERCEDES C. |
|
|
|
|
|
|
| 2 |
9571/A
Injector holder clamp for W. POLO -
MERCEDES ISUZU - hexag mm 22 |
|
|
|
|
|
|
| 3 |
9227/A
Injector tester tool G.M. for RENAUL T -
MACK trucks and reduction for extraction. |
|
|
|
|
|
|
| 4 |
9499/1
Gear for rotation of the engine flywheel
MERCEDES MAN TRUCKS - last serie |
|
|
|
|
|
|
| 5 |
9499/H
Adjustable universal gear for flywheel
rotation of engines of IVECO, EUROCARGO,
EUROTEC 190.38- 190.42 and so on. |
|
|
|
|
|
|
| 6 |
9897
Tool kit with 14 ground gauges for the
checking of ISO tubings tollerance of
1 tenth f.e. |
|
|
 |
|
|
|
|
 |
|
|
| 1 |
9609
(KDEP Rif.1047)
14 mm and 10 mm hex.
adjusting wrench for Fiat 190 |
|
|
| 2 |
9609/8
Adjusting wrench55 mm
height for Fiat 115/17 |
|
|
| 3 |
9609/C
Adjusting wrench hex. 14 + two teeth Iveco-
Eurocargo. |
|
|
| 4 |
9609/D
Adjusting wrench hex. 14 + two teeth Iveco-
Eurocargo. |
|
|
| 5 |
9609/E
Adjusting wrench with tour teeth on
SCANIA BOSCH pump and allen wrenchs
3 mm. |
|
|
| 6 |
9711
13 mm hex. adjudting wrench
and 4 mm allen wrench. |
|
|
| 7 |
9710
(KDEP Rif.1 048)
10 mm hex. adjudting wrench
and 3 mm allen wrench. |
|
|
| 8 |
9609/F
Wrench to adjust the K governar
hex. 8+ screwdriver 5 mm. |
|
|
| 9 |
9847
(KDEP Rif. 1542)
Oisassembly wrench for two teeth
membrane and screwdriver. |
|
|
| 10 |
9846
(KDEP Rif. 1578)
27 mm hex. adjusting wrench
for trucks. two 016 teeth,
tw0012teeth
and 4 mm allen wrench
Mercedes19.44, pump P 7100. |
|
|
|
|
|
|
9701/K |
|
|
|
|
|
|
| 1 |
9174/K |
Comparator support for taking the delivery start
dimension on Bosch P - P7100 - 8500 - type R pumps.
With reduction for Bosch P pumps with left connection
Bosch 8500 - Fried Mayer and so on. |
|
|
|
|
|
| 2 |
9174/MW |
Reduction to be mounted on the 9174/K to take the
delivery start dimension on Bosch MW pumps. |
|
|
|
|
|
| 3 |
9445/A |
Tool equipped with capillary hole-drilled glass to take
delivery start with overflow. Thread 12 x 1.5 - 14 x 1.5. |
|
|
|
|
|
| 4 |
9087 |
Centesimal comparator mm 10. |
|
|
|
|
|
| 5 |
9682 |
Universal comparator support for pumps on line:
A - B - BV - N - SIMMS - PES... M, PES... RSF BOSCH.
Thread12x1.5-14x1.5. |
|
|
Universal comparator supports box for delivery start on test bench and check far
BOSCH P injection pumps setting on the engine. |
|
 |
|
|
 |
|
|
|
9174/K
Comparator support to take the delivery start
dimension on ali Bosch P, P71O0, 8500 type
R pumps and to seI injection pumps on the
engine.
Universal tool, quick and precise, for timing
pumps on trucks such as IVECO,
MERCEOES, MAN, ValVa, RENAULT,
SCANIA, OAF, MACK, PEGASO and so on. |
|
|
|
 |
|
|
|
9174/P
Reduction for 9174/K for Bosch P pumps
with left connection 8500 Bosch, Fried Mayer
and so on. |
|
 |
|
|
 |
|
|
|
9174/MW
Reduction to be mounted on 9174/K for
taking the delivery start dimension on Bosch
MW pumps for IVECO EUROTEC,
MERCEOES 250 TO and so on. |
|
|
|
 |
|
|
|
9445/A
Tool equipped with capillary hole-drilled
glass to take delivery start with overflow.
Thread 12 x 15 - 14 x 1.5.
Trucks IVECO, MERCEOES and so on. |
|
 |
|
|
 |
|
|
|
9682
Universal comparator support to take the
delivery start dimension on pumps on line:
A, B, BV, NN, SIMMS, PES..M, PES...RSF
BOSCH.
For its use both the needle and the spring
of the valve musI be removed. Then the
pressure connector musI be remounted. |
|
|
|
 |
|
|
|
9145
Tool equipped with capillary hole-drilled
glass to take the delivery star dimension.
With exhaust valve, it enables to clearly see
the overflow. Thread 12 x 1.5 - 14 x 1.5. |
|
|
|
|
|
|
9881 K |
|
|
|
|
|
|
| 1 |
9881 |
Equalizer comparator bearing with return spring for rod |
|
|
|
|
|
| 2 |
9446 |
Comparator bearing to survey the rod stroke A, B,
BV pumps. |
|
|
|
|
|
| 3 |
9500 |
(BH Rif. 1687233015)
Decimai comparator 30 mm stroke. |
|
|
|
|
|
| 4 |
9501 |
Magnet. |
|
|
|
|
|
| 5 |
9502 |
(BH Rif. 1688130030)
Dial gauge bearing for rod stroke Bosch P 24 x 1.5. |
|
|
|
|
|
|
9502/A |
Clamp with two rods. |
|
|
|
|
|
| 6 |
9502/C |
Reducer for 9502 for Bosch 8500 24 x 1.5 female. |
|
|
|
|
|
| 7 |
9483K19 |
Reducer for 9502 for Bosch MW pump 26 x 15. |
|
|
|
|
|
| 8 |
9881/A |
Comparator bearing to survey the rod share Bosch M,
RSF pumps (Mercedes, Ford Transit). |
|
|
Box complete with universal comparator support to take dimension of rod stroke on
pumps on line BOSCH P, P7100, 8500, A, B, BV, BOSCH MW, M, RSFand so on. |
|
 |
|
|
 |
|
|
| 1 |
9881
Equalizer universal comparator bearing with
return spring for rod share P Bosch pumps.
18 x 1.5 B, BV pumps
20 x 1.5 A pumps
24 x 1.5 interno inside Bosch P pump
24 x 1.5 esterno outside Bosch 8500 pump |
|
|
|
 |
|
|
| 2 |
9446
Comparatar bearing to survey
the rod strokefor A - B- BV pumps. |
|
|
| 3 |
9500
(BH Rif. 1687233015)
Decimai comparator 30 mm
stroke for rack rod share. |
|
|
| 4 |
9501
Magnet. |
|
|
|
 |
|
|
| 8 |
9881/A
Comparator bearing to survey the rod share
Bosch M, RSF pumps
(Mercedes, Ford Transit). |
|
 |
|
|
 |
|
|
| 5 |
950218
Comparator bearing to survey the rod share
with connections for Bosch p. P7100, 8500,
MW Bosch pumps. |
|
|
|
9502
(BH Rif. 1688130030)
Dial gauge bearing for rod stroke thread
24 x 1.5 outside for P Bosch pumps. |
|
|
|
9502/A
Clamp with two rods |
|
|
|
 |
|
|
| 6 |
9502/C
Reducer for 9502 for Bosch 8500 pump
thread 24 x 1.5 inside. |
|
|
|
 |
|
|
| 7 |
9483
Reducer for 9502 thread 26 x 1,5 outside.
Mw BOSCH pump. |
|
|
|
|
9995
|
|
| |
9990 digital thermometer with red leds. Portable
device, battery transistorized
adapted with a probe for immediate operation: It can be used to take exhaust gas
temeperature during controls of turbines, LDA (regulator valve on injection pump and
on many tractors) and correspondence between gas temperature and delivery start.
Dimensions 150 x 70 x 50 mm.
Weight Kg. 0,700. |
|
 |
|
|
|
| 1 |
9838/A
Regulator spring-presser tool. It enables
an easy massbalancing with our wrench
9879 on page 18. |
|
|
|
|
| 2 |
9890
Puller I connector kit for oil seal of the
accelerator shaft RO governor. |
|
 |
| 3 |
9888
Reamer for governor hub mass holder. |
|
|
|
|
| 4 |
9887
Conical reamer for governar shaft pin
diamo 3 mm. |
|
|
|
|
| 5 |
9994
3-theeth wrench for regulator spring plate,
K type.
(BH Rif. KDEP 1634). |
|
|
inviaci un e-mail
inviaci un fax al
n. 
chiamaci al n.